Download Print this page

Main Features - Sony IPELA PCS-G50 Technical Documentation Manual

Integration with sony network camera
Hide thumbs Also See for IPELA PCS-G50:

Advertisement

Integration with Sony Network Camera

Main Features

©2008 Sony Corporation
Video/Audio Types
H.264 and MPEG4 are supported for video (for single codec only).
G.711 is supported for audio.
You can monitor real-time network camera images and transmit voice data bi-
directionally through the PCS-G50/G70 during a videoconference.
Easy Connection
Through the phone book (called the "network camera list") of the PCS-G50/G70,
you can easily connect to a network camera using a procedure similar to that for
videoconferencing. You can register up to 20 network cameras in the network
camera list.
The network camera list is separate from the 500 items in the ordinary phone
book.
Private and shared phone books are not supported.
To register a network camera in the network camera list, see the PCS-G50/G70
Operating Instructions Manual (Version 2.6).
Multipoint Connection
Up to 6 points (including the local site) can be connected, and split-screen viewing is
possible. Multipoint connection in a mixed IP (H.323/SIP) and ISDN environment is
possible for video communication terminals.
For multipoint connection, MCU software for LAN connection (sold separately)
is required.
For multipoint connection in a mixed SIP and ISDN environment, SIP software
and MCU software for ISDN connection (sold separately) are required.
Far End Camera Control
You can use the far end camera control function when connected to a network
camera. The procedures for acquiring broadcast permission for the target network
camera and for controlling the far end camera are the same as for when the
PCS-G50/G70 is used at a remote site.
To use the far end camera control function, you must have the proper permission
settings. (See p.5.)
If the far end camera control function is enabled by the PCS-G50/G70, it can
also be used from video communication terminals as sub-terminals.
The far end camera control function can be used in full screen display mode
only.
VIDEO COMMUNICATION SYSTEM - TECHNICAL DOCUMENTATION
February, 2008 / Ver 1.0
3

Advertisement

loading

This manual is also suitable for:

Ipela pcs-g70Ipela pcs-g70pPcs-g50p