Table of Contents
Advertisement
D-ILA Projector
D-ILA Projector
DLA-G10U/E Ceiling Mount
Projecteur D-ILA
Projecteur D-ILA
Monture au plafond pour DLA-G10U/E
EF-G10CG
When installing, also read the DLA-G10U/E instruction manual.
Thank you for purchasing this product.
Before using your new purchase, please read this instruction manual thoroughly. And, after
reading, be sure to store this instruction manual in a safe place for future reference.
Pour l'installation, se reporter également au mode d'emploi du DLA-G10U/E.
Nous vous remercions d'avoir acheté ce produit.
Avant d'utiliser votre projecteur, veuillez lire attentivement toutes les instructions de ce
manuel. Puis, après l'avoir lu, rangez-le en lieu sûr de façon à pouvoir vous y reporter.
Instruction Manual
Mode d'oemploi
CONTENTS
Safety Precautions ....................................................................2
Unit Dimensions ........................................................................4
Names of Parts .........................................................................5
Installation .................................................................................6
Parts List ...................................................................................7
How to Install.............................................................................8
How to Prevent Dropping ........................................................10
Installing the Ceiling Mount on the Ceiling ..............................11
Mounting the Projector on the Ceiling Mount ..........................12
Projection Angle Adjustments .................................................13
Replacing the Lamp and Filter ................................................14
Specifications ..........................................................................15
Table des matières
Consignes de sécurité.............................................................16
Dimensions de l'appareil .........................................................18
Nom des pièces ......................................................................19
Installation ...............................................................................20
Liste des pièces ......................................................................21
Comment installer ...................................................................22
Pour empêcher la chute ..........................................................24
Installation de la monture au plafond sur le plafond................25
Montage du projecteur sur la monture au plafond ..................26
Réglage de l'angle de projection.............................................27
Remplacement de la lampe et du filtre....................................28
Fiche technique.......................................................................29
BHU30002-028-01
Advertisement
Table of Contents
Related Manuals for JVC DLA-G10E
Summary of Contents for JVC DLA-G10E
-
Page 1: Table Of Contents
Parts List ...7 How to Install...8 How to Prevent Dropping ...10 Installing the Ceiling Mount on the Ceiling ...11 Mounting the Projector on the Ceiling Mount ...12 Projection Angle Adjustments ...13 Replacing the Lamp and Filter ...14 Specifications ...15 Table des matières Consignes de sécurité...16... -
Page 2: Safety Precautions
PRECAUTIONS FOR SAFE AND PROPER USE Numerous symbols are employed as indication in the precautions for safety, precautions for handling, and in the indication to the products. These are designed to prevent in advance any possible infliction of injury on you and other individuals and the damage of properties through the proper use of the product. - Page 3 This can result in projector malfunction, deterioration of image quality, fire or electrical shock. Do not install the projector in a box or other closed space where the hot air from the projector cannot be exhausted. Do not block the exhaust port of the projector.
-
Page 4: Unit Dimensions
UNIT DIMENSIONS Ø11 These specifications are subject to change without notice. All dimensions below are given in mm. 3-Ø11Elongated holes 5˚ 5˚ 15˚ 15˚... -
Page 5: Names Of Parts
NAMES OF PARTS Tilt adjustment screw Tilt adjustment screw Tilt fulcrum (pivot) screw The same screws are also used on the opposite side. Vertical/horizontal adjustment screws The same screws are also used on the opposite side. Vertical angle adjustment screws Ceiling mount L-plate Horizontal angle... -
Page 6: Installation
170 ~253.9 341.5 ~509.8 If the edges of images are distorted when projecting at the minimum project distance, it is recommended that the projector be moved slightly backward. Install the projector in a stable location away from walls and furniture for safety during light source lamp and filter replacement. -
Page 7: Parts List
PARTS LIST The following parts are provided as accessories with this projector. Make sure all of the parts are present before stating the installation work. 1. Ceiling mount 4. Hex bolt 8mm) 7. Screw 15mm) Completion drawing 2. Drop prevention fixture 5. -
Page 8: How To Install
Extend the two legs of the DLA-G10U/E by rotating. Rotate until rotation becomes stiff and then stop to prevent damage. The other legs of the projector do not rotate. Peel off the rubber pad adhered to one of the legs so the embedded nut is visible. - Page 9 Install the ceiling mount on the DLA-G10U/E by aligning the holes and cutouts, then install the stopper. Firmly tighten the accessory screw (M8 Screw (M8 15mm) Spring washer Flat washer HOW TO INSTALL Top fitting Use care to prevent the top fitting from dropping during the installation work since this could result in injury or damage.
-
Page 10: How To Prevent Dropping
The M5 bolts for ceiling mounting are to be procured separately. Consult your dealer. Be sure to mount the drop prevention fixture directly above the projector. Consult your dealer concerning the ceiling installation work. [ ~ ‹ à ‹... -
Page 11: Installing The Ceiling Mount On The Ceiling
Temporarily fasten with four M10 bolts in the sequence of accurately and then securely tighten the four M10 bolts. The total weight of the projector and ceiling mount is 20.5kg. Install at a sufficient distance, referring to the projection distance range table on page 6. -
Page 12: Mounting The Projector On The Ceiling Mount
MOUNTING THE PROJECTOR ON THE CEILING MOUNT Engage the L-plate on the pin of the ceiling mount. Drop prevention fixture Fasten temporarily with the vertical angle adjustment screws (4) which were removed. After fastening with the vertical adjustment angle screws (4), perform the adjustments described on page 13. -
Page 13: Projection Angle Adjustments
PROJECTION ANGLE ADJUSTMENTS Pre-adjustment Operations · Look at the projector instruction manual and turn on the power. · Use the zoom lens to match the projected image size to the size of the screen. Perform the above operations before starting the projection angle adjustments. -
Page 14: Replacing The Lamp And Filter
Observe the following cautions when replacing the light source lamp or filter. Failure to do so can result in personal injury or projector damage. · Turn off the POWER button of the remote control or OPERATE button of the projector and disconnect the power cord from the power outlet. -
Page 15: Specifications
Fixture Mass : 6.2kN Fixture size : 454mm (W) 359mm (D) 176mm (H) Mass with projector mounted : 20.5kN External dimensions with projector mounted : 454mm (W) 402mm (D) 377.5mm (H) Accessories : M8 15 screw (1), flat washer (1) Spring washer (1)