JVC LST0886-001A Instructions Manual page 79

Receive
A
Receive
B
Stream
C
Multicast IP
Address
D
Multicast Port You can change the multicast port number.
Speech
A
Destination
Port
Common
A
HTTP Port
For specifying settings related to receiving of audio sound sent from the
camera.
For specifying whether to receive audio sound. Select AOnB to receive
audio sound.
For selecting the stream format of the received audio sound.
When AHTTPBis selected, lost packets are recovered via resending. When
A MulticastBis selected, you can monitor the audio sound of the camera
using a multiple number of client PCs. During receiving via multicast., start
multicast sending on the [Streaming] page. (A Page 48)
Note:
●When the built-in viewer is launched with AMulticastB specified, a
Windows firewall warning may appear. In this case, select AunblockB and
proceed.
● If AblockB is selected, the Windows firewall will block the multicast
stream and playback of multicast by the viewer will fail.
You can change the multicast IP address.
The default address is 225.0.3.1.
Specify the same value as the parameter that is set on the [Streaming]
page of the camera. (A Page 48)
The default port number setting is 39152.
Specify the same value as the parameter that is set on the [Streaming]
page of the camera. (A Page 48)
For specifying settings for sending audio sound to the camera from the
computer.
You can change the destination port for sending audio sound to the camera
from the computer. The default port number setting is 49298
For specifying the HTTP port settings
For changing the port number during access to the camera from the client
PC via HTTP.
The default port number is 80.
Specify the same value as the parameter that is set on the Protocol.
(A Page 47)
79