Hitachi CP-TW2503 User Manual page 93

Interactive Function (continued)
Using the Drawing Function
Touching the projected image from the projector with a bundled pen starts
Drawing Mode.
A tool bar like the figure below is displayed on the projector screen while in the
drawing mode. Touching an icon on the tool bar with the pen enables the following
functions. Touching anywhere on the tool bar except an icon and dragging moves
the tool bar.
NOTE
• Images may be copyrighted, in which case, permission from the
copyright holder is necessary for use, in accordance with the copyright act and
other applicable laws.
• Up to 4 pens are supported at the same time.
1. Pen Selects the pen function.
Pen :
Dragging it draws a line of the specified pen color and size.
Laser Pen :
Dragging it draws a line of the specified pen color and size.
The previous drawing with a Laser Pen is deleted when you resume drawing
after 3 or more seconds have passed.
Eraser :
Switches the pen function to that of an eraser.
NOTE
• Long press of Pen or Laser Pen operates the same as clicking the
right mouse button.
Presentation tools
93