Table of Contents
Advertisement
Orientation
of Camera
Screws
2.
Fasten the ceiling mount to the ceiling
Align the "™FRONT" mark on the ceiling mount
in the direction that the camera is facing.
Fasten the ceiling mount using the 4 screws
while taking care not to catch the connection
cables. Use M4-sized (No 8) screws or bolts.
For woodscrews, make use of those with a
diameter of 4.1 mm.
Notes
• Be sure to use 4 screws and attach them
firmly.
• The seals attached to the ceiling-mount
screw holes of the ceiling mount act as an
insulator between the ceiling mount and the
ceiling structure. If the ceiling structure is
made of a metallic material, improper
insulation with the camera may cause noise
interference in the images. To prevent this
FRONT
from occurring, ensure proper insulation
Mark
during installation.
21
Advertisement
Table of Contents
