Set The Telephone Line Type - Brother MFC-J430W Quick Start Manual

11
Set Tone or Pulse dialling
mode
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Tone/Pulse.
Press OK.
d
Press a or b to choose Pulse (or Tone).
Press OK.
e
Press Stop/Exit.
12
Set the telephone line
type
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Phone Line Set.
Press OK.
d
Press a or b to choose Normal, PBX or ISDN.
Press OK.
e
Press Stop/Exit.
6
13
Set the telephone line
compatibility (VoIP)
If you are connecting the machine to a VoIP service
(over the Internet) you need to change the
compatibility setting.
Note
If you are using an analogue telephone line you
can skip this step.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Compatibility.
Press OK.
d
Press a or b key to choose
Basic(for VoIP).
Press OK.
e
Press Stop/Exit.