Paper Jam In The Bypass Tray; Paper Jam In The Automatic Duplexing Unit - Toshiba e-studio206l Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
2
Check that there is no folded/curled paper or
overloading, and then close the drawer of the Large
Capacity Feeder.
Be sure that the height of the stacked paper does not exceed the
line indicated inside of the side guides.

Paper jam in the bypass tray

1
Move the green paper holding lever toward the
outside.
The paper can now be removed.
2
Pull out the jammed paper in the bypass tray.
3
Place paper in the bypass tray again and then move
the green paper holding lever toward the inside.
If a sheet of paper is stained, folded or torn, replace it with a new one.

Paper jam in the automatic duplexing unit

Be careful not to let your fingers be caught between the equipment and the duplexing unit or automatic duplexing
unit.
This could injure you.
1 TROUBLESHOOTING FOR THE HARDWARE
2
Clearing a Paper Jam
1
21