Disassembly Of Cam Gear; Assembly Of Tray Base Assembly - Panasonic SA-PT750PL Service Manual

SA-PT750PL
Step 5 Remove the change lever, slide plate (L) & slide plate
(R) in the direction of arrow.

10.34. Disassembly of Cam Gear

• • • • Follow (Step 1) to (Step 3) of Item 10.3.
• • • • Follow (Step 1) to (Step 3) of Item 10.4.
• • • • Follow (Step 1) to (Step 4) of Item 10.5.
• • • • Follow (Step 1) to (Step 4) of Item 10.7.
• • • • Follow (Step 1) to (Step 4) of Item 10.8.
• • • • Follow (Step 1) to (Step 3) of Item 10.28.
• • • • Follow (Step 1) to (Step 2) of Item 10.31.
• • • • Follow (Step 1) to (Step 5) of Item 10.33.
Step 1 Remove the cam gear from the mecha base in the
arrow of direction.
10.35. Assembly of Tray Base
Assembly
• • • • Reverse (Step 1) to (Step 4) of Item 10.8.
Step 1 Rotate the cam gear anti-clockwise. (Align at position
(B) as marking on gear with arrow.)
Step 2 Make sure drive gear (A) is in vertical position.
Step 3 Keep the open lock gear pressed in the position shown.
Step 4 Connect FFC cable at the connector (CN7003) on Tray
P.C.B.
Step 5 Align the tray base assembly to the tray guide (L) & tray
guide (R).
Step 6 Push the tray base assembly in the direction of arrow
shown.
66