JVC 0303NHMMDWJEIN Instructions Manual page 46

CD changer
After pressing CD DISC, you can perform the following operations
on a CD changer:
3:
Start playing.
4:
Return to the beginning of the current (or previous)
track.
¢:
Skip to the beginning of the next track.
7:
Stop playing or recording.
8: Pause playing. To resume, press 3.
1 – 6, 7/P: Select the number of a disc installed in a CD
changer.
After pressing CD, you can perform the following operations on a
CD changer:
1 – 10/0, +10: Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10/0.
For track number 30, press +10, +10, then 10/0.
Example:
• Selecting disc number 4, track number 12, and starting playback.
1. Press CD DISC, then press 4.
2. Press CD, then press +10, 2.
If your CD changer is of 200-disc loading capability (except for
XL-MC100 and XL-MC301),
you can do the following operations using the 10 keys after pressing
CD.
1. Select a disc number.
2. Then select a track number (always enter two digits).
3. Start playback.
Examples:
• Selecting disc number 3, track number 2, and starting playback.
Press 3, then, 0, 2, then 3.
• Selecting disc number 10, track number 5, and starting playback.
Press 1, 0, then, 0, 5, then 3.
• Selecting disc number 105, track number 12, and starting
playback. Press 1, 0, 5, then 1, 2, then 3.
43
CD recorder
After pressing TAPE/CDR (or TAPE/CDR CONTROL), you can
perform the following operations on a CD recorder:
3:
Start playing.
4:
Return to the beginning of the current (or previous)
track.
¢:
Skip to the beginning of the next track.
7:
Stop playing or recording.
8: Pause playing. To resume, press 3.
1 – 10/0, +10: Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10/0.
For track number 30, press +10, +10, then 10/0.
REC PAUSE: Enter recording pause by pressing this button.
To start recording again, press this button then 3.
Cassette deck
After pressing TAPE/CDR (or TAPE/CDR CONTROL), you can
perform the following operations on a cassette deck:
3:
Start playing.
REW: Fast wind the tape from right to left.
FF: Fast wind the tape from left to right.
7:
Stop playing or recording.
8: Pause playing. To resume, press 3.
REC PAUSE: Enter recording pause by pressing this button.
To start recording again, press this button then 3.
Note:
You can use either the TAPE/CDR or the TAPE/CDR CONTROL
button to activate the buttons for the target source. If you press the
TAPE/CDR button, the playing source also changes. On the other
hand, pressing the TAPE/CDR CONTROL button does not change the
playing source.