Basic Connections; Setting The Date And Time; Line Selection - Panasonic VoiceSonic KX-NT700 Quick Reference Manual

Quick Reference Guide

Basic Connections

LINE
A AC Adaptor Cord
B LAN Cable
C 2-conductor Telephone Cord
D To AC Outlet
E To Switching Hub
F Telephone Jack or PBX (RJ11C)
Note
•
If using an AC adaptor, use only the included AC
adaptor (PQLV206).
•
To use PoE (Power over Ethernet), connect the
LAN cable to a PoE-compatible (IEEE802.3af)
switching hub. The included AC adaptor does
not need to be connected when using PoE.
Connecting a Portable Station (PS)
Connect the included PS Cable to the [AUDIO IN/
OUT] jack of the unit (A), and to the headset jack of the
PS.
Connecting a Computer
Connect the included PC Cable to the [AUDIO IN/
OUT] jack of the unit (A), and to the microphone jack
4 Quick Reference Guide
LAN DC IN
A
B
C
A
(red plug; B) and headphone jack (green plug; C) of
the computer.
D
Connecting an External Wired MIC
E
F
An optional KX-NT701 External Wired MIC can be
connected to the unit using the EXT MIC1 (A) or EXT
MIC2 (B) jacks. 2 mics can be connected.
Setting the Date & Time
1.
Press [MENU].
2.
Select "Basic Settings", then press
3.
Select "Date & Time", then press
4.
Using the keypad, enter 2 digits each for the year,
month, day of the month, hour (24-hour format), and
minute.
5.
Press
SAVE
6.
Press [MENU].

Line Selection

The unit can make calls using the IP line, TEL line, PS
line, and PC line.
The IP line is always available when the unit is
connected to an IP network. Whether the TEL line, PS
line, or PC line is available is determined by the "Line
Selection" setting. For example, when it is set to "IP
+ PS", the IP and PS lines are available.
1.
Press [MENU].
2.
Press
LINE
3.
Select the desired setting.
•
"IP + TEL": The IP and TEL lines are available.
•
"IP + PS": The IP and PS lines are available.
B
A
B
A
.
.
Document Version
C
.
SELECT
.
SELECT
2008/10