Yamaha RX-V395 RDS Service Manual page 10

RX-V395/RDS HTR5130/RDS
SELF 2 RAM THROUGH B
L/R and RL/RR pass through the PS-RAM and are
output through the DSP.
CENTER is output with the steering OFF and by
(L+R)/2. (WIDE mode)
The electronic volume (for CENTER/REAR) is -10dB.
FL displays "SELF 2"
YSS203
DOLBY PRO LOGIC section
L
Steering
OFF
R
DSP section
PS-RAM
SELF 3 RAM THROUGH C
L/R is output with the steering OFF.
CENTER is output with the steering OFF and by
(L+R)/2. (WIDE mode)
RL/RR passes through the PS-RAM and is output
through the DSP.
The electronic volume is +10dB for CENTER and
+7dB for REAR.
FL displays "SELF 3"
YSS203
DOLBY PRO LOGIC section
L
Steering
OFF
R
DSP section
PS-RAM
9
L
C
C (L+R)/2
R
FL
FR
RL
RL
RR
RR
L
C
C (L+R)/2
R
RL
RL
RR
RR
SELF 4 EFFECT OFF/DISCO/FL ALL ON
Every time the PRESET STATION No. 4 key is
pressed, the menu changes.
1: EFFECT OFF
2: DISCO (electronic volume is 0dB.)
3: FL displays all ON
SELF 5 MANUAL TEST
Every time PRESET STATION No. 5 key is pressed,
the TEST TONE shifts in the order of →L→C→R→S
and is output.
(The CENTER mode is WIDE)
The electronic volume (for CENTER/REAR) is
0dB.
SELF 6 DOLBY PRO LOGIC
The auto input balance which is ON in the normal
mode is turned OFF.
CENTER MODE is changed by pressing the PRE-
SET STATION No. 6 key or the CENTER MODE
key.
The electronic volume (for CENTER/REAR) is
0dB.
FL displays "SELF 6" and the center mode.