N/W-Fax Driver General Errors - Toshiba e-studio352 Network Fax Manual

This Port is Currently in Use
Problem Description
The driver was either open, printing a job, or is in use by another printer or application, when you
attempted to delete it.
Corrective Action
Make sure all print jobs have completed before deleting a port. If there are still problems, exit all
applications and try again. Check each driver to see if another driver is using the same port. If
so, first change the driver's port setting and delete the port.
Problem with the Current Printer Setup
Problem Description
The driver was not set up properly, possibly because the installation procedure did not complete.
Corrective Action
Delete the driver and either reinstall it from the distribution CD-ROM or download it from this
equipment.

N/W-Fax Driver General Errors

Driver Mapped to Wrong Port
Problem Description
If the N/W-Fax driver on a client workstation points to the wrong network port, jobs do not appear
in the current jobs queue or print out.
Corrective Action
1. Open the Printers folder from the Control Panel.
2. Right-click the printer driver icon.
3. Select Properties from the shortcut menu.
4. Depending on the operating system, select the following tab:
- In Windows 98/Me — Select Details. Browse to select the printer or Novell queue.
- In Windows NT 4.0/2000/XP/Server 2003/Vista — Select Ports. Add a new port and map
it to the printer.
5. Make sure that the path to the printer and the device name are correct.
\\<device name>\print
- Where <device name> is the same as the device name set from the Touch Panel Display.
6. Click the General Tab and click Print Test Page to confirm that the settings are correct.
"Could not connect to the MFP device" Appears.
Problem Description
When users are trying to access the properties of the Network Fax driver, an error message
"Could not connect to the MFP device" appears.
Corrective Action
Communication between the Network Fax driver and this equipment failed. Make sure that this
equipment is operating. If not, turn its power ON.
N/W-Fax Driver Errors 117