User Interface Definitions; Led Indications - Motorola CS4070 Manual

To manually reestablish paring when the device returns to range, press the Bluetooth LED button. Upon
Bluetooth pairing, the beeper emits a short low high beep and the Bluetooth LED starts its slow, consistent
blinking again.

User Interface Definitions

The scanner uses beeper and LED sequences to indicate various system events.
define these sequences and events.

LED Indications

LED Indications
Table 2-1
Function Performed
Scan attempt
Successful bar code scan
Battery charge status
Delete bar code
(when in batch mode)
Successful bar code deletion
Unsuccessful deletion - item
doesn't exist (when in batch
mode)
Clear all bar code data
(when delete (-) button enabled)
Successful clear all
Charge scanner
Charge complete
User Action LED Feedback
Press scan (+) Flashing green
button
Solid green
Press battery 4 green
charge button
3 green
2 green
1 green
Press & hold Flashing amber
delete (-) button
Solid amber
Solid red
Press & hold Flashing amber
delete (-) button 3
seconds past scan
time
Solid amber
Connect scanner Flashing amber
to a host PC USB
port
Solid green
Scanning
Table 2-1 and Table 2-2
Other
Imager on
Imager off
Full charge (for 8 hours at 6
scans per minute)
Less than 8 hours but more
than one of operating time
Less than 1 hour of operating
time
???
Imager on
Imager off
Imager off
Imager on
Imager off
Scanner connects in mass
storage mode, auto-run
application on PC launches
2 - 3