Wake On LAN
This Wake-on-LAN function can wake up the system from the sleeping mode to the fully powered mode
over the network immediately and automatically. Once the system is awake, it can be directed to run
management utilities. This function increases end-user productivity by avoiding disruptions during
working hours.
QoS
The QoS function allows the DGE-530T to transmit and receive tagged frames, such as 802.1p priority
tagged frames and 802.1Q VLAN tagged frames. In order for the QoS to function on the DGE-530T, it
must be connected to a switch that supports and is configured for QoS. These priority tagged frames
will let real-time programs optimally utilize the network bandwidth. High priority packets will be
processed before low priority packets.
NOTE: To implement QoS on the DGE-530T, it must be connected to a switch or other device
that supports and is configured for 802.1p QoS.
Jumbo Frames
Jumbo Frames are Ethernet frames that are larger than 1518 bytes. Jumbo frames may be used to
reduce server CPU utilization and improve wire efficiency.
By implementing extra data in fewer packets, jumbo frames can increase throughput and decrease CPU
utilization. However, additional latency may be introduced.
End-to-end network hardware must support this capability or these packets will be dropped.
Consult your network administrator or switch manual for more information concerning configuring and
understanding Jumbo Frames.
Supported protocols are limited to IP (TCP, UDP).
•
Jumbo frames require compatible switch connections that forward jumbo frames. Contact
•
your switch vendor or manual for additional information.
There is no benefit to configure jumbo frames if standard size Ethernet frames (64 to1518
•
bytes) are used.
Jumbo frames may be simultaneously used with VLANs.
•
Advanced Features
7
DGE-530T Gigabit Ethernet Adapter Card
3