Storage Compartment - Yamaha MT-07 Owner's Manual

To release a helmet from the helmet
holding cable
1. Remove the passenger seat.
2. Remove the screwdriver, then re-
move the helmet holding cable
from the helmet.
3. Store the cable under the seat by
hooking the cable loops over the
screwdriver, install the screw-
driver in its original position, and
then hook the helmet holding ca-
ble over the hook on the bottom of
the passenger seat.
2
1
1. Screwdriver
2. Helmet holding cable
3. Hook
4. Install the passenger seat.
INSTRUMENT AND CONTROL FUNCTIONS

Storage compartment

1. Storage compartment
The storage compartment is located
under the passenger seat. (See page
3-19.)
When storing documents or other
items in the storage compartment, be
sure to wrap them in a plastic bag so
that they will not get wet. When wash-
ing the vehicle, be careful not to let any
water enter the storage compartment.
3
WARNING
 Do not exceed the load limit of
1.5 kg (3 lb) for the storage com-
partment.
 Do not exceed the maximum
EAU14465
1
EWA10962
3-22
load of MT07 176 kg (388 lb)
MT07A 173 kg (381 lb) for the ve-
hicle.
3