Guiding Signals - Dell 1410X User Manual

Hide thumbs Also See for 1410X:
Table of Contents

Advertisement

Guiding Signals

Projector
Status
Standby mode
Warming up
mode
Lamp on
Cooling mode
Power Saving
mode
Cooling before
Power Saving
mode
Projector
overheated
Lamp driver
overheated
Fan breakdown
Lamp driver
breakdown
Color Wheel
breakdown
Fault - DC
supply (+12V)
46
Downloaded from
www.Manualslib.com
Description
Projector in Standby mode. Ready to power
on.
Projector takes some time to warm up and
power on.
Projector in Normal mode, ready to display
an image.
Note: The OSD menu is not accessed.
Projector is cooling to shutdown.
Power Saving mode has been activated. The
projector will automatically enter standby
mode, if an input signal is not detected in
two hours.
The projector takes 60 seconds to cool down
before entering Power Saving mode.
Air vents might be blocked or ambient
temperature may be above 35ºC. The
projector automatically shuts down. Ensure
that the air vents are not blocked and that
the ambient temperature is within
operational range. If the problem persists,
contact Dell.
The lamp driver is overheated. The air vents
may be blocked. The projector automatically
shuts down. Turn the display on again after
the projector cools down. If the problem
persists, contact Dell.
One of the fans has failed. The projector
automatically shuts down. If the problem
persists, contact Dell.
The lamp driver has failed. The projector
automatically shuts down. Unplug the power
cord after three minutes then turn the
display on again. If this problem persists,
contact Dell.
Color wheel cannot start. The projector has
failed and the projector automatically shuts
down. Unplug the power cord after three
minutes and then turn on the projector. If
this problem persists, contact Dell.
Power supply has been interrupted. The
projector automatically shuts down. Unplug
the power cord after three minutes and then
turn on the projector. If this problem
persists, contact Dell.
Troubleshooting Your Projector
manuals search engine
Control Buttons
Indicator
TEMP
Power
(Amber)
BLUE
OFF
Flashing
BLUE
OFF
BLUE
OFF
BLUE
OFF
AMBER
OFF
Flashing
AMBER
OFF
OFF
AMBER
AMBER
AMBER
AMBER
ÒFF
Flashing
AMBER
OFF
Flashing
AMBER
BLUE
Flashing
AMBER
AMBER
Flashing
LAMP (Amber)
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
AMBER
Flashing
AMBER
Flashing
AMBER

Advertisement

Table of Contents
loading

Table of Contents