Other Hookups - Sony STR-DE685 Operating Instructions Manual

Other hookups
CONTROL Al II
q
' CD player, tape
deck, MD deck, etc
CONTROL Al
II
hookup
l
If you have a Sony CD changer with a
COMMAND MODE selector
l
If you have a CONTROL Al II compatible
Sony CD player, SACD player, tape
deck, or MD deck
instructions supplied with your CD player,
SACD player, tape deck, or MD deck for
Use a monaural mini-plug cord (not
details.
supplied) to connect the CONTROL Al II
jack on the CD player, SACD player, tape
deck, or MD deck to the CTRL AI II jack on
the receiver. Refer to "CONTROL Al II
control system" on page 39 and the operating
If your CD changer's COMMAND MODE
selector can be set to CD 1, CD 2, or CD 3,
be sure to set the command mode to "CD 1"
and connect the changer to the CD jacks on
the receiver.
However, if you have a Sony CD changer
with VIDEO OUT jacks, set the command
mode to "CD 2" and connect the changer to
the VIDEO 2 jacks on the receiver.
continued
Note
If you make CONTROL Al II connections fi-om
the receiver to an MD deck that is also connected
to a computer, do not operate the receiver while
using the "Sony MD Editor" software. This may
cause a malfunction.
13GB