Table of Contents
Advertisement
Stylus Adjustment
Control of the unit is accomplished primarily through the stylus by touching/writing
on the screen. If the system cannot correctly identify your stylus' input, please run
through the screen calibration procedure.
1.
From the settings window, select [Stylus Adjustment] to start the screen
calibration procedure.
2.
Use the stylus and touch
the cross at the center of
the screen once.
3.
Touch the cross in the
second position once.
4.
Touch the cross in the third
position once.
5.
Continue the calibration by
touching the cross.
6.
setting page will return
when stylus adjustment is
finished.
53
Advertisement
Table of Contents
Troubleshooting
