Initializing au Media Tuner
To use the EZ Television (1 Seg) with the au Media Tuner, initialize both the
au Media Tuner and EZ Television (1 Seg).
1
When the standby screen is
displayed, hold down V for at
least one second.
aImportant notes are displayed.
2
Use G to check the
important notes, use G to
select OK, and then press
@ (
[Select]).
aA screen for performing the initial
settings is displayed when using the au Media Tuner.
Follow the directions on the screen to configure each setting and this displays
the screen for setting EZ Television (1 Seg) channels.
3
Use G to select
@ (
[select]), use G to
select OK, and then press
@ (
[select]).
Select
(Auto), press
(Manual) to set the area manually.