Panasonic digital cellular phone brochure (25 pages)
Summary of Contents for Panasonic W62P
Page 1
Contents/ Getting Ready Phone Call Inputting Characters Address Book/ Pair Function Mail Camera EZweb EZ Navi au Media Tuner Other Functions Troubleshooting/ Remote Ctrl Lock Index...
Page 2
Thank you for purchasing the W62P. Before using it for the first time, be sure to read the W62P Basic Manual (this PDF manual) so as to know how to use it correctly. After you finish reading this manual, store it and the printed materials that come with the phone in a safe place for future reference.
ellphone Etiquette Mind your manners! A cellphone always emits weak radio waves while it is turned on. Enjoy operation of your cellphone without forgetting to be considerate of those around you. Some locations do not allow the use of cellphones. Using a cellphone while driving a car or a motorcycle is dangerous and prohibited by Traffi...
® ”, wallpaper, and them by e-mail. to PCs. other data. page page page In addition to the functions covered in this page, your W62P also has the following features. “Other Functions” (page 87)
Normally leave the phone turned on. The phone needs to be turned on to make and receive Power calls. Hold down h for at least 1.5 seconds to turn on W62P. After a while, W62P turns on with tone and the standby page screen appears.
Using a Cellphone While Driving is Prohibited! Do not use the cellphone while driving a car or riding a motorcycle/ bicycle. It may result in a traffi c accident. Using a cellphone while driving is prohibited by law. Using a cellphone ×...
Disaster Message Board Service Disaster Message Board The Disaster Message Board lets you use EZweb to register information about your well-being in case of a major disaster. The information you register can be accessed from anywhere in Japan over EZweb or the Internet. When a major disaster strikes, you can use your au cellphone to access the “...
Useful Sentences ......37 Checking the Contents of the Package ........8 Address Book Names of Parts ........9 Opening W62P by Using a Single Key Registering an Address Book ..39 (One-push Open) ......10 Editing an Address Book Record ..41 Charging the Battery .......10 Adding Outgoing or Incoming Turning Power On ......12...
Page 9
Reading Received C-mail Messages ......55 Troubleshooting Camera Remote Ctrl Lock Camera Features ......56 Shooting a Photo ......58 If You Lose Your W62P .....89 Viewing Photos ........59 Attaching a Photo to Index an E-mail Message .......59 EZweb Using EZweb ........60 Displaying the au one Top ....61 Bookmarking Sites You Frequently Access ....62...
Ready set? Before using the W62P, check the contents of the package comes with your W62P. Be prepared to the basic operations such as; how to charge the battery, how to turn the power on, etc. Checking the Contents of the Package •...
Names of Parts Front Back Optical Earpiece sensor Indicator (LED) Main Built-in display antenna Sub display Speaker Navigation Camera lens Closeup switch Address book key Application key Photo light/ Mail key EZ key Standby light Memo/Clear Answer/ FeliCa mark Pair key Power/End key Number keys Battery pack/...
Open key. Your W62P might not open fully, depending on its direction. Be careful not to drop it by its rebound when opening your W62P by pressing the key. Be careful not to catch your fi ngers when opening your W62P.
Page 13
AC adaptor may be different from that shown in the illustration above.) Pull out the connector of the common AC adaptor 01/02 (option) straight so as to be parallel to the W62P or the desktop holder connector terminal when you connect them. Connect the common AC adaptor 01/02 (option) to the desktop holder.
Turning Power On Hold down for at least 1.5 seconds. The standby screen appears. Icon Very Out of Signal Strength Strong Medium Weak Weak Range Communication is not possible while the signal strength icon is (Out of Range). Communication may not be possible while the signal strength icon is (Very Weak).
Security Code and Passwords The W62P lets you use the numbers and passwords described below. Do not forget your numbers and passwords. You will need them to perform various operations and to access subscription services. Security Code For remote operation of the Voice Mail and Transfer Incoming from...
Selecting English as the Display Language While the standby screen is displayed, press to select “ ” (settings), and press (OK). Press (ScreenSetup/ DisplayLighting).
Page 17
Press (Set Language). Press (English). This selects English as the display language. Even if English is selected as the display language, schedule and other dates are displayed in the format year/month/day. Folder names inside of the Data Folder are also displayed in year/month/day format.
0 will display key help. Holding down c for about one second toggles side key’s disabling feature on and off while W62P is folded. To cancel the side key’s disabling feature, follow the procedure above with W62P opened.
Display Indicators The following explains the main icons that appear on the standby screen. Signal strength Battery level A microSD memory card (commercial item) is inserted into the cellphone. Calling or EZweb browsing EZ apps (BREW ® )/PC Site Viewer on Unread mail au Music Player/SD-Audio Player/au Media Tuner on...
Use M to select the item, and press c (OK) to access the function associated with the item. The design and contents of the W62P’s “Main Menu” vary according to the body color. Items requiring little explanation are detailed as for “CHARMANT GOLD”...
Life&News photo data folder television EZ FeliCa tools settings • • Touch Message Enjoy TV. Various data can be received/sent via FeliCa. data folder • • tools Displays data in cellular phone. Various useful functions can be used. camera • •...
Using soft keys Soft keys are the keys you use to execute the functions along with the bottom of the screen. The table below explains how to assign the soft keys to the on-screen functions. Note that the function of each soft key depends on the currently displayed screen.
Initializing E-mail and EZweb An EZweb subscription is required to use e-mail, EZweb and other EZ services. If you did not subscribe when you purchased your phone, contact your nearest au shop or the au Customer Service Center. You will be assigned an e-mail address automatically when you perform the EZweb initialization procedure.
Checking Your Current My phone number and Phone Number and mail address E-mail Address While the standby screen is displayed, press to select “settings”, and press (OK). Press (Profi le). Your current phone number and e-mail address appear. Your phone number and e-mail address can be checked by pressing c, and pressing 0 while the standby screen is displayed.
Changing Your E-mail Address E-mail address @ezweb.ne.jp Part you can change Domain name While the standby screen is displayed, press Press (E-Mail Setup). Press (Other Setup). When the EZweb connection confi rmation screen appears, press 1 (Yes). Press ) (Change E-mail Address).
Page 26
Enter your Security Code, press (OK), use select “ ” (Send), and press (Select). Use select “ ” (Accept), and press (Select). to select the text box, and press (Edit). Enter the e-mail address you want, and press (OK). To input an e-mail address ...
hone Call Making a Call While the standby screen is displayed, use the number keys ( ) of the keypad to enter the phone number you want to call. When calling regular phones, you need to enter the area code. Press After you fi...
Making an International Call au International Call Service Available without any additional application. Ex: To call 212-123- in the USA 005345 Press International access code Area code Phone number Country code (USA) When the area code begins with “0”, leave this out when dialing. •...
After you fi nish a call, press h to hang up. Open to Talk function You can also answer the call just by opening W62P. “To set Open to Talk” (page 86) Display for Incoming Calls If the caller’s name is in your address book, it appears...
Redialing (Outgoing Records/ Incoming Records) While the standby screen is displayed, press V : Displays outgoing records. C : Displays incoming records. to select the record whose number you want to dial, and press The phone stores up to 50 records each for the outgoing records and incoming records.
Changing the Ring Tone While the standby screen is displayed, press to select “settings”, and press (OK). Press (Sound/Vib/LED). Press (Incoming Call). Continued on the next page...
Page 32
Press (Melody). Press (Fixed Sound). To hear the currently selected ring tone, press a (Check). to select the ring tone you want, and press (OK). The ring tone is set. The initial setting is “Incoming Tone1”. You can also download a “Chaku-Uta ®...
Adjusting the Ring Tone Volume To adjust the ring tone volume, perform steps 1 through 3 under “Changing the Ring Tone” (page 29), and continue with the following steps. Press (Incoming Call). Press (Volume). To hear the ring tone at the current volume setting, press a (Play).
Adjusting the Earpiece Volume during a Call During a call, use adjust the volume. Z : Increases volume. X : Decreases volume. You can adjust the earpiece volume (level 1-6). When you set the maximum volume (level 6), displayed on the screen. Turning On Manner Mode While Manner Mode is on, the phone alerts...
When Easy Voice Memo is on, the icon appears on the display. W62P can store up to 4 Easy Voice Memos, each of which can contain up to 20 seconds recording time. If a new Easy Voice Memo is recorded when there are already four in the memory, the oldest, unprotected, and has already been played back is deleted automatically to make room for the new one.
Playing an Easy Voice Memo When Easy Voice Memos are stored The messages “ Call” and “ EasyVoiceMemo” appear on the standby screen. Select “ Call”, and press (OK). The incoming records list appears. to select the record with the icon, and press (Disp).
nputting Characters Input characters using keypad keys 0 through 9 . The table below shows the characters each key cycles through when you press it. Number of Presses & " Space Break lines Toggles between upper case and lower case (Example: a Inputs “,”...
Inputting an E-mail Address david@ Inputting “david@ezweb.ne.jp” ..In this example, we will input “david@ezweb. ne.jp” for “ E-Mail Add1 ”. To input “ E-Mail Add1 ”, perform steps 1 through 6 under “Registering an Address Book” (page 39), and perform the following steps. Input “david”.
Inputting Pictographs and Useful Sentences The following procedure shows how to input pictographs and useful sentences into the body text when creating a new e-mail message. Press (Char), and press You can also select a pictograph by pressing ; . to select the pictograph you want, and press...
Page 40
The following shows the input screens for symbols (double-byte) and emoticons. Inputting Symbols (Double-byte) In step 1 of the procedure above, press a (Char), and press 5 (&@) to display the “FullSym” (double-byte symbol menu). Inputting Emoticons In step 3 of the procedure above, press 1 (Emoticon) in place of 2 (Useful Sentence) to display the emoticon menu.
ddress Book Registering an Address Book While the standby screen is displayed, hold down for about one second. Select “ Name ”, and press (Edit). Enter the name, and press (OK). Reading is generated automatically when you enter a name. To input text ...
Page 42
Enter the phone number, and press (OK). When entering the number of regular phones, be sure to include the area code. to select “ E-Mail Add1 ”, and press (Edit). If you do not want to enter an e-mail address, jump to step 8.
Editing an Address Address... Book Record Birthday... Group... Example: To edit the phone number of “Bob Jones”. While the standby screen is displayed, press to select the record you want to edit, and press (Menu). Press (Modify), and press (Overwrite). to select “...
Adding Outgoing or Incoming Record Data to the Address Book While the standby screen is displayed, press to select the phone number you want to save, and press (Menu). V : Displays outgoing records. C : Displays incoming records. Press (Reg Add Book).
Dialing from Hello? the Address Book While the standby screen is displayed, press , and to select the record whose phone number you want to dial. Press (Disp). The details screen of the record appears. to select the phone number, and press...
air Function You can save up to fi ve phone numbers (like frequently used ones from the address book). You can make calls or send mails with these saved numbers (called Pair partners) more easily. Registering a Pair Partner While the standby screen is displayed, press If the Pair partner is not registered, the confi...
Making a Phone Call, or Sending Mail to Pair Partner While the standby screen is displayed, press to select the Pair partner. to select “Call”, and press (OK). Sending e-mail : After selecting “Send E-Mail” and pressing c (OK), selecting “Create New” and pressing c (OK) will display a screen for a composing and sending an e-mail message.
EZweb subscription subscription required required Your W62P supports two types of mail: e-mail and C-mail. Using E-mail To use e-mail, EZweb subscription is required. If you did not subscribe when purchasing your phone, contact your nearest au shop or the au Customer Service Center.
Creating and Sending E-mail Messages While the standby screen is displayed, press , and press (Create New). Select , and press (Edit). : Address to which the e-mail will be sent. Press (Address Book), to select an addressee, and press (Select).
Page 50
to select , and press (Edit). : Subject of the e-mail message. Enter the subject, and press (OK). Use to select , and press (Edit). : Body of the e-mail message. Enter the body text, and press (OK). Press (Send) or The message “Sent.”...
X to scroll. Use m and e to scroll between messages. Press r to return to the e-mail message list. You can also enable to show the received e-mail message by opening W62P. “To set Open to Disp New” (page 86)
Reading an E-mail Message with Attached Photos to select the e-mail message, and press (Disp). to select the attached data, and press (Select). to select a fi le name, and press (Play). Depending on the size of the attached data, it may not come in at the same time as the mail message.
Replying to a Received E-mail Message To reply to an e-mail message, perform steps 1 through 3 under “Reading Received E-mail Messages” (page 49), and perform the following steps. Press (Reply). is prefi xed with “Re:”, and the body text of the e-mail is quoted. Press (Edit), and enter the body text.
Avoiding Spam It is recommended that you use our mail fi lter function to block spam. You can activate mail fi lter easily using “Supportive settings” by answering questions that appear on the display. Activating mail fi lter Example: To access “ ”...
Using C-mail C-mail is a mail service between compatible au cellphones that uses telephone numbers. You can send C-mail messages that contain up to 50 double-byte characters (100 single- page byte characters). C-mail sending fee is charged to send C-mail. To the recipient’s phone number.
Creating and Sending Hold down C-mail Messages While the standby screen is displayed, hold down for about one second, and press (Create New). Select , and press (Edit). Press (Address Book), to select an addressee, and press (Select). You can also select a phone number from sending/receiving records, or you can enter an address.
While the standby screen is displayed, hold down m for about one second 2 (Inbox)Use B to select a C-mailc (Disp). You can also enable to show the received C-mail message by opening W62P . “To set Open to Disp New” (page 86)
Your W62P comes with a built-in 2.1-megapixel, 2.07-million effective pixels camera and various different functions for shoot photos. You can attach the photos that you shot to e-mail messages. Camera Features Use your images for W62P functions You can use photos you shot for the standby screen, for the image that appears while the ring tone is sounding, and in your address book.
Page 59
The following shows the sizes of the photos that can be recorded with your W62P. Photo sizes Where to save Phone 120×160 Wallpaper 240×320 “Photo Folder” in W62P’s Data Folder WideWallpaper 240×400 0.3M 640×480 1280×960 “Digicam Folder” in microSD Memory Card 1.5M (Wide)
Shooting a Photo While the standby screen is < displayed, hold down for about one second. Point the lens at the subject, and < press (Shutter) or The phone emits a shutter sound. Note that the phone emits the shutter sound even if Manner Mode is on.
Viewing Photos While the standby screen is displayed, press , use to select “data folder”, and press (OK). to select “Photo Folder” and press (Detail). Selecting “All Data” displays a list of all photos in the “Photo Folder”. to select the dated folder, and press (Detail).
EZweb EZweb subscription subscription required required Using EZweb To use EZweb, EZweb subscription is required. If you did not subscribe when purchasing your phone, contact your nearest au shop or the au Customer Service Center. In addition to EZweb subscription, an initialization procedure is needed before you can use EZweb.
Displaying the au one Top While the standby screen is displayed, press , use to select “EZweb”, and press (au one Top). Search by keywords Provides information search function by keywords. Provides a list of various content provider sites. (Category (Menu List)) Provides the automatically-updating news.
Bookmarking Sites Bookmark You Frequently Access Display favorite sites you want to bookmark, and press (BrowserMenu). Press (New bookmark). You may not be able to bookmark some sites. Press (Reg). to select a folder, and press (OK). The message “Registered.” appears when completed.
Viewing a Bookmarked Site While the standby screen is displayed, press to select “EZweb”, and press (Bookmark(s)). to select a site or folder, and press (OK). If you selected a folder, use B to select a site, and press c (OK).
Downloading Chaku- Uta-Full and Chaku-Uta ® ® To download a Chaku-Uta-Full ® or Chaku-Uta ® perform step 1 under “Displaying the au one Top” (page 61), and perform the following steps. to select “ ” (Category (Menu List)), and press (OK).
Checking Charges You can check call and transmission charges. While the standby screen is displayed, press When the EZweb connection confi rmation screen appears, press 1 (Yes). to select the item you want to check, and press (Select).
EZ News Flash EZ News Flash is a free information service that sends the latest news, weather, and horoscope information to your standby screen. A telop is displayed on the standby screen with a continuous stream of the latest news, which you can then select to browse further information.
Page 69
Turning on EZ News Flash You can use EZ News Flash by just making a simple setting (free). Perform steps 1 through 3 under “Initializing E-mail and EZweb” (page 21), and perform the following steps. While the standby screen is displayed, use to select telop, and press...
EZweb EZweb Navi subscription subscription required required EZ Navi uses global positioning system (GPS) information to provide you with useful information. EZ Navi Features Use N to select Press e. “ EZnavi ”. Standby screen EZweb menu EZ Navi menu “...
Page 71
• “ ” (Area Message) (free) These functions allow W62P to be used to check the location of other Security Navi-enabled au cellphone, and have mails sent to a designated au cellphone when the person with W62P enter (or are detected in) and leave (or are no longer detected in) a preset area at a preset time.
You can use au Media Tuner to play programs registered with EZ Channel-Plus/EZ Channel. Antenna (TV signal receiver) for W62P The TV antenna is installed inside the W62P unit. Open your W62P to watch Television (1Seg). We recommend holding your W62P with your right hand as shown here when watching Television (1Seg).
Follow the procedure below to make settings when using au Media Tuner for the fi rst time. As steps vary according to the body color of your W62P, please follow the appropriate steps for your model before proceeding. INTELLIGENT PURPLE...
“OK ( (Do not confi rm again)”. Watching Television (1Seg) As steps vary according to the body color of your W62P, please follow the appropriate steps for your model. INTELLIGENT PURPLE While the standby While the standby...
Page 75
Receipt of data broadcasting begins when you start up the Television (1Seg). The screen will automatically switch to the data broadcast operation display after a short while. When this screen is displayed, press a ( ) (TV operation) to switch to the TV operation display.
Watching Television (1Seg) during charge You can watch Television (1Seg) while the battery is charged in the desktop holder. Keep your W62P open before you insert it into the desktop holder. Ending au Media Tuner Press , and press (Stop).
ther Functions Simple Mode Simple Mode lets you limit operations to the telephone function, address book, camera, e-mail, C-mail, EZweb, and other frequently used functions. Entering Simple Mode While the standby screen is displayed, press , use to select “settings”, and press (OK).
Exiting Simple Mode While the standby screen is displayed, press to select “SETTINGS”, and press (Select). Press (SimpleModeOFF). Press (Yes). This returns to Usual Mode.
Using the Simple Mode main menu For composing For using the and reading address book, e-mail/C-mail outgoing/ messages, and incoming for changing records, and for e-mail addresses. registering data in the address book. For checking the latest news information. For selecting the photo or movie recording, and For viewing and...
Page 80
Registering an address book in Simple Mode 090 ... While the standby screen is displayed, press press (Register), and press (Fix). Enter the name, and press (OK). To input text “Inputting Characters” (page 35) Check the reading of the name you inputted, press (OK), and...
Page 81
Press (Input by Myself). You can also select data in sending records or receiving records. To go without saving e-mail address, press 4 (Not Input) and perform step 7. Enter the e-mail address, and press (OK). To input an e-mail address ...
Using the address book in Simple Mode Example: To view a record in the address book. While the standby screen is displayed, press , and press (Look). to select the address book record you want to view, and press (Select). Press (Read Data).
Page 83
Creating and sending e-mail messages in Simple Mode While the standby screen is displayed, press , press (E-Mail), and press (Create Mail). Press (Address Book), to select an addressee, and press (Select) twice. You can select an address from sending/receiving records, or you can manually enter an address.
Page 84
Enter the body text, and press (OK). To input text “Inputting Characters” (page 35) Press (Not Attach). Pressing c (OK) displays a confi rmation screen. In case of attaching some data with e-mail, operate the followings. 1 (Data Folder): You can select a photo etc.
Teens Mode Teens Mode can be used to block spam, and to block inadvertent access to phone numbers and URLs included inside mail messages. Teens Mode can also be used to restrict call time and the number of sending mail. Using Teens Mode Teens Mode can be used to restrict mail reception and display contents.
Activating Teens Mode While the standby screen is displayed, press to select “settings”, and press (OK). Press (User Support), and press (Mode Setup). Press (Teens Mode). Press (SwitchTeens Mode), and enter the lock No., and press (OK). The lock No. is required when changing from Teens Mode to Usual Mode or Simple Mode.
To stop Safety Buzzer To stop Safety Buzzer, input the lock No., and press c (OK). You cannot turn off W62P or perform any other operation while the Safety Buzzer is sounding. The Safety Buzzer will continue to sound until you input the lock No.
“IncomingAnswer” : Answer incoming call when opening phone. To set Open to Disp New While the standby screen is displayed, press c533 , and press 1 (ON). Even if you open W62P, a new mail message is not displayed when “Auto Lock” or “Mail Rstr” is effective.
Page 89
You can shoot up to nine consecutive You can upload and backup various images and store all of them or only data in your W62P (in Data Folder, selected images in memory. Favorite, etc.) to au one My Page on server to manage/check them.
roubleshooting Symptom What to check What to do Page The phone does Is the battery pack Correctly install the battery pack. not turn on. installed correctly? Is the battery pack Charge the battery pack . P.10 charged? Are you holding down Hold down h for at least 1.5 h for at least 1.5 P.12...
W62P. Confi guring Lock by Incoming settings You can set Auto Lock and FeliCa Lock on by making calls several times from the registered phone number to your W62P within the specifi ed period of time. While the standby screen...
Page 92
to select a registration number, press (Edit), input the phone number, and press (Reg). You can also press p (Menu) before inputting a phone number, and select the number from the address book, outgoing records, or incoming records, or you can specify a pay phone. You can register up to three different phone numbers.
When Remote Ctrl Lock is activated, the W62P will be automatically turned off and then back on again. Remote Ctrl Lock cannot be activated if the W62P is not turned on or if it is outside its service area, or when “Emission OFF (M57)” settings is “Emission OFF”.
ndex Address book ........39 Earpiece volume........ 32 Adding outgoing or incoming Easy Voice Memo ......33 record data to the address book ... 42 Delete ..........34 Deleting ........... 40 Playback .......... 34 Dialing from the address book ..43 Turning on ........
Page 95
Key functions ........16 Redialing (outgoing/incoming records) ..28 Remote Ctrl Lock ......89 Mail C-mail ..........53 Safety Buzzer ........85 E-mail ..........46 Security Code ........13 Mail fi lter ......... 4,52 Security Lock Service ....... 91 Main menu ........18,77 Set Language ........
Page 96
Cellphone and PHS operators collect and Company au online manual recycle unused telephones, batteries and battery chargers at stores bearing the Panasonic Manufactured by: logo regardless of brand and manufacturer to protect the environment Mobile Communications Co., Ltd. and reuse valuable resources.