Co Line Access - Panasonic KX-TDA50G Feature Manual

3.1.14 CO Line Access

Feature Manual References
6.1.3 Flexible Buttons
21.2 Exclusive Features Table
Operating Manual References
1.3.52 Private Network Features—CLIP (Calling Line Identification Presentation)
1.3.53 Private Network Features—CLIR (Calling Line Identification Restriction)
1.3.55 Private Network Features—COLR (Connected Line Identification Restriction)
3.1.14 CO Line Access
Description
There are three methods of accessing a CO line.
Method
Idle Line Access (Local
Access)
Trunk Group Access
S-CO Line Access
Conditions
•
Class of Service (COS) programming determines the trunk groups available for making calls.
•
CO Line numbers can be referred on a CO line port basis.
•
Button Assignment
A flexible button can be customized as a G-CO, L-CO, or S-CO button as follows:
Type
Loop-CO (L-CO)
Group-CO (G-CO)
Single-CO (S-CO)
It is possible to assign:
–
the same CO line to the S-CO button and to a G-CO button.
–
the same trunk group to more than one G-CO button.
–
more than one L-CO button.
Dialing the CO Line Access number selects a CO button according to the following priority: S-CO ® G-CO
® L-CO
•
Direct CO Line Access
56 Feature Manual
Description
Selects an idle CO line
automatically from the assigned
trunk groups.
Selects an idle CO line from the
corresponding trunk group.
Selects the desired CO line
directly.
Any trunk group that is made available for Idle Line Access through
system programming is applied.
A trunk group is assigned.
A specified CO line is assigned.
Operation
Dial the Idle Line Access number or
press a L-CO button.
Dial the Trunk Group Access number
and a trunk group number, or press a
G-CO button.
Dial the S-CO Line Access number and
the CO line number, or press the S-CO
button.
Assignable parameter
Document Version 2008-11