Pc Programming - Panasonic KX-TDE100 Feature Manual

13.1.6 PC Programming

[For PC Console Only]
•
Incoming Group Screen:
Names, extension numbers, and the status (e.g., busy) of each extension can be monitored on a single
screen. Calls can also be made and received on this screen.
Conditions
•
Hardware Requirements: KX-DT343/KX-DT346 or KX-T7633/KX-T7636 DPT and USB Module
Installation Manual References
KX-TDE100/KX-TDE200
3.8.4 First Party Call Control CTI Connection
KX-TDE600
3.10.4 First Party Call Control CTI Connection
PC Programming Manual References
3.24 [1-1] Slot—Port Property - Extension Port
→ DPT Type—Type
→ DPT Type—Location No.
PT Programming Manual References
[601] Terminal Device Assignment
Feature Manual References
21.1 Capacity of System Resources
13.1.6 PC Programming
Description
Although many PBX features can be programmed using a proprietary telephone (PT) (® 13.1.30 PT
Programming), a PC connected to the PBX can use the Maintenance Console software to program in further
detail. System programming, diagnosis, and data upload/download can be performed either through on-site
programming or remote programming.
1.
On-site Programming: Programming that is performed using an on-site PC connected directly to the PBX.
2.
Remote Programming: Programming that is performed using an off-site PC that connects to the PBX via
a CO line.
1. Connection Methods for On-site Programming
Method
Serial Interface
(RS-232C) port
210 Feature Manual
Description
The PC is connected to the PBX via the Serial Interface
(RS-232C port) of the PBX.
Required
Hardware
–
Document Version 2009-12