2.7 Starting the System for the First Time
2.7 Starting the System for the First Time
2.7.1 Starting the System for the First Time
1.
Set the Power Switch to the "OFF" position.
2.
Set the System Clear Switch to the "CLEAR" position.
3.
Plug the AC power cord into the system and an AC outlet.
4.
Turn the Power Switch on.
5.
Press the Reset Button with a pointed tool.
(The power indicator will flash.)
6.
Slide the System Clear Switch to the "NORMAL" position while the power indicator is
flashing (within approximately 10 seconds).
The system will be initialised with default values. The system will also check the outside lines,
extensions, and optional cards and units.
KX-TD816
Power Indicator
116
Reset Button
SYSTEM CLEAR
RESET NORMAL CLEAR
Power Switch
System Clear Switch
To AC Outlet
General Installation