Panasonic SJ-MR220 Service Manual page 21

3. Press the PLAY key of the remote controller ("T0**" changes to "LD"
of the LCD).
4. Press the
the LCD).
5. Perform the read power adjustment. Set the light power at 600
10% by using VOL+, VOL- , EQ and PLAY MODE keys of the remote
controller. In the laser power adjustment, EQ and PLAY MODE keys
change every 8 steps for VOL+ and VOL- keys change 1 step.
Note:
EQ and PLAY MODE keys are applied for only (GH) area. For other areas, those keys are not
applied. Perform with only VOL+ and VOL- keys.
Caution:
key of the remote controller ("LD" changes to "LP" of
Fig. 7
Fig. 8
Fig. 9
21
W±