Rear/Side Of Remote Control Panel - JVC RM-LP25U Instructions Manual

[KNEE POINT] Knee Point setting knob:
For adjusting the knee point setting manually when the auto
knee button is turned OFF .
Decreases the knee
point.
Note:
● The feature is not available on the camera if the light of
the corresponding button is not lit. Control using this unit
is disabled in this case.
S
[BARS] Video Output Control Button and
Indicator Light
ON
(Orange light on)
OFF
(Green light on)
Note:
● The feature is not available on the camera if the light of
the corresponding button is not lit. Control using this unit
is disabled in this case.
KNEE POINT
Increases the knee
point
Outputs the color bar signals.
:
Outputs the camera's video
:
signals.

Rear/Side of Remote Control Panel

T
OPERATE LOCK BARS
PART
OFF FULL
SCENE FILE
SPEED
1 2 3 4 5
PART
SHUTTER
1/100
NORMAL 1/120 1/250 1/500 1/1000 1/2000 VARIABLE
GAIN
0dB 3dB 6dB 9dB 12dB 15dB 18dB
LEVEL
-3dB -6dB ALC LOLUX VARIABLE
LEVEL GAMMA LEVEL DETAIL KNEE POINT AUTO
KNEE
BLACK WHITE BALANCE MODE
COMPRESS STRETCH MANUAL PRESET FAW AW A AW B
WHITE PAINT
PAINT AUTO WHITE
R B
BLACK PAINT
PAINT AUTO BLACK
R B
PART
OVER OPEN
PRESET
IRIS MODE
LEVEL
FULL
AUT
PRE
IR IS
SET
LEV
AUTO
FULL
TALLY
CALL PREVIEW
UNDER
CLOSE
MASTER
BLACK
T
Cable
Cable for connecting to the camera. (Cable length: 5 m)
U
[PREVIEW]Preview Terminal (Output)(A 22 page)
This is the terminal for sending output to the make contact
when you press and hold the [PREVIEW] button Q.
V
[TALLY]Tally Terminal (Input)(A 22 page)
This is the terminal for inputting tally signals, such as those
from the image switch that the controlled camera is connected
to.
[PGM]:
Connects the tally signal when the controlled camera is
selected as the program. When input signals are received,
the tally indicator O lights up in red.
[PVW]:
Connects the tally signal when the controlled camera is
selected as the preview. The tally indicator O lights up in
green.
Note:
● When there is input of both [PGM] and [PVW] signals at
the same time, priority is given to [PGM] , and the tally
indicator O lights up in red.
W
DIP Switch (A 24 page)
A part of the features can be specified according to the
usage of individual users.
U V
W