Panasonic WV-CP310/G Installation Manual page 19

9
Turn on the power.
WV-CP300/G, WV-CP310/G
Use the power cord (accessory) to connect the power supply.
Important:
• The included power cord is the dedicated power cord of this product. Do not use it with other
devices.
220 V-240 V AC,
50/60 Hz
Caution:
• The camera shall be connected with cord set with plug.
Plug for respective country shall be mounted on the
Power cord by a qualified electrical.
WV-CP304E, WV-CP314E
Important:
• Use 24 V AC or 12 V DC power supply that is insulated
from 220 V-240 V AC power.
• The power supply is automatically switchover either 24 V
AC or 12 V DC. No setting is required with this camera.
1 Loosen the screw of the power cord plug (accessory).
2 Connect the power supply of 24 V AC or 12 V DC to the
power cord plug.
Strip the end of the wire by 3 mm to 7 mm, and twist the
stripped part of the wire sufficiently to avoid short circuit.
Specification of power cord (wire): AWG #16 - #24,
Single core, twisted
Important:
• Check whether the cord core is fully inserted into the
power cord plug.
<Ratings>
24 V AC
- 2-N
+ 1-L
Power cord (accessory)
12 V DC
(GND)
⊕
Power cord
plug (accessory)
3 mm - 7 mm
220 V-240 V VIDEO OUT
~50/60 Hz
24V~IN 2-N 1-L
VIDEO OUT
IN
12V
Power supply
(24 V AC
or 12 V DC)
19