JVC HR-FS1U Instructions Manual

Jvc video cassette recorder instructions

Advertisement

Quick Links

LPT0510-001B
COPYRIGHT © 2000 VICTOR COMPANY OF JAPAN, LTD.
Dear Customer,
Thank you for purchasing the JVC VHS video cassette recorder.
Before use, please read the safety information and precautions to
ensure safe use of your new VCR.
CAUTIONS
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
CAUTION:
This video cassette recorder should be used with AC 120V
60Hz only.
To prevent electric shocks and fire hazards, DO NOT use any
other power source.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA
LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU
FOND.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
CAUTION:
Changes or modifications not approved by JVC could void
user's authority to operate the equipment.
VIDEO CASSETTE RECORDER
HR-FS1U
INSTRUCTIONS
Declaration of Conformity
Model Number:
Trade Name:
Responsible Party:
Address:
Telephone Number: 973-315-5000
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Failure to heed the following precautions may result in damage
to the VCR, Remote or video cassette.
1. DO NOT place the VCR ...
... in an environment prone to extreme temperatures or
humidity.
... in direct sunlight.
... in a dusty environment.
... in an environment where strong magnetic fields are
generated.
... on a surface that is unstable or subject to vibration.
2. DO NOT block the VCR's ventilation openings.
3. DO NOT place heavy objects on the VCR or on the Remote.
4. DO NOT place anything which might spill on the top of the
VCR or on the Remote.
5. AVOID violent shocks to the VCR during transport.
VCR Plus+ and PlusCode are registered trademarks of Gemstar
Development Corporation.
The VCR Plus+ system is manufactured under license from
Gemstar Development Corporation.
For Customer Use:
Enter below the Model No. and Serial No. which are located
,
d
on the rear of cabinet. Retain this information for future
reference.
Model No.
Serial No.
Cassettes marked "VHS" (or "S-VHS") can be used with this
video cassette recorder. However, S-VHS recording is not
possible with this model.
This model is equipped with SQPB (S-VHS QUASI PLAYBACK)
that makes it possible to play back S-VHS recordings with
regular VHS resolution.
HQ VHS is compatible with existing VHS equipment.
As an E
product or product model meets the E
for energy efficiency.
HR-FS1U
JVC
JVC Americas Corp.
1700 Valley Road Wayne, N.J. 07470
®
S
Partner, JVC has determined that this
NERGY
TAR
Printed in China
1100 IYVfIDfBJ
®
S
guidelines
NERGY
TAR

Advertisement

Table of Contents
loading

Summary of Contents for JVC HR-FS1U

  • Page 1 LPT0510-001B COPYRIGHT © 2000 VICTOR COMPANY OF JAPAN, LTD. Dear Customer, Thank you for purchasing the JVC VHS video cassette recorder. Before use, please read the safety information and precautions to ensure safe use of your new VCR. CAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 2: Important Product Safety Instructions

    IMPORTANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing.
  • Page 3: Buttons, Connectors And Indicators

    When there is no tape in the VCR, the indicators are all off. D Back light Playback : green Recording : red...
  • Page 4: Connections And Plug&Play Setting

    On-screen display If you press OSD on the Remote when “SUPERIMPOSE” is set to “ON”, you can see the current VCR status on the TV screen. Press OSD again to exit on-screen display. The indications are not recorded even if the VCR is in the recording mode.
  • Page 5: Initial Settings

    Final preparation for use Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. You can now perform basic playback or basic recording.
  • Page 6: Tuner Setting

    (back to the beginning) Complete Semiauto Clock Set Press MENU to return to normal screen. Turn off the VCR. “Aut” will appear on the display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.
  • Page 7: Basic Playback

    When the tape is not running Rewind/fast-forward at high speed Press REW ( Eject the tape Press STOP/EJECT ( You can also eject the cassette when the VCR is turned off. Turn off the VCR Press POWER. Playback Features Adjusting tracking condition —...
  • Page 8: Basic Recording

    Locating beginning of timer recordings — Instant Review After ensuring that the VCR is turned off and that the timer mode is disengaged, press REVIEW on the Remote. The VCR turns on, and rewinds to the index code indicating the beginning of the last timer-recorded program, then begins playback automatically.
  • Page 9: Recording Features

    Watching one program while recording another During recording… If you connect the TV and the VCR only using the RF connection to view pictures from the VCR, press TV/VCR on the Remote so that VCR mode indicator goes off from the display panel.
  • Page 10: Vcr Plus+ ® Timer Programing

    The PlusCode programing numbers are the numbers next to the program in most TV listing. Load a cassette with the record safety tab intact. The VCR turns on, and the counter is reset, automatically. Press PROG. on the Remote to access the PlusCode No.
  • Page 11: Checking, Canceling Or Changing Program Settings

    – Timer Recording – To use the VCR while it is in timer recording standby mode Press TIMER, then press POWER. After you use the VCR, press TIMER again to put the VCR into timer recording standby mode. Checking, canceling or changing...
  • Page 12 (on-screen display) appears on the screen. NOTE: When you use this VCR as the playback VCR for editing a tape, be sure to set this function to “OFF”; otherwise, the VCR status information (on-screen display) will be recorded on the edited tape.
  • Page 13: Multi-Brand Remote Control

    VCR is initially set to respond to A code signals. You can easily modify your VCR and the Remote to respond to B code signals. When using two JVC VCRs, set two VCRs and their Remotes to different codes, so that you can operate these VCRs separately.
  • Page 14: Specifications

    Editing You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components’ instruction manuals for connection and its operations.
  • Page 15: For Servicing (Only In U.s.a.)

    Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level performance for which JVC is world famous. The JVC service and engineering organization stands behind our products.
  • Page 16: Warranty (Only In U.s.a.)

    WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period.

Table of Contents