Sharp 802 User Manual page 80

• The sound can be recorded with a video clip if the microphone is turned on. The default
setting of the microphone is set to "On". To record a video clip without the sound, turn
off the microphone. For details, see "Recording Video Clips with the Sound" on page 82.
Recording Close-up Video Clips
1.
In video camera mode, set the macro switch to the macro position (
2.
Press or the side-down key to start recording the video clip.
To cancel macro mode, set the macro switch to the normal position (
Sending Video Clips
"Camera"
1.
Press .
Press the camera key in the viewer position of the display.
2.
To stop recording, press
To view the preview before saving, select "Preview".
3.
Select "Save and Send".
Select the desired way you wish to send.
For details, see "Creating a New Message" on page 85.
Note
• You can send video clips only when "For Message" is selected for the recording time. For
details, see "Selecting the Recording Time" on page 81.
.
Camera
).
).
79