Announcement (Broadcast) To All Members Of A Line Trunk Group - Siemens HiPath 4000 Operation Manual

Making Calls – Convenience Functions
Step by step
j
Enter code!
52
Announcement (broadcast) to all members of
a line trunk group
You can use this function to send an announcement to
all members (10 - 40) of a line trunk group.
Z
Once you have activated the group call, you will hear a
confirmation tone. You can then begin the announce-
ment.
^
Lift the handset.
or
n
Press the key and enter speakerphone mode.
Enter the system code for "announcement" (contact the
relevant service personnel if necessary)
j
Enter the internal phone number of the group member.
Z
The loudspeakers on all group phones are automatically
switched on and you will hear a confirmation tone. You
can begin the announcement.
^
You end the announcement by replacing the handset.
^
If a group member lifts their handset, they are connect-
ed to you and the announcement is ended.
n
If a group member presses the speaker key for the an-
nouncement, they are disconnected from the an-
nouncement. If the last remaining member of the group
presses the speaker key, the announcement ends.