Siemens HiPath 2000 User Manual page 136

More functions/services
Step by Step
136
j
Establish a connection to the system. Enter the station
number (contact your service personnel).
j
Wait for the continuous tone (if necessary, switch
phone to tone dialing) and enter the internal number as-
signed to you and the corresponding PIN.
#
Enter the code (only required if programmed in the sys-
tem).
j
Wait for the dial tone and enter the code for example,
97 for Do not disturb on. If necessary, make further
*
entries; refer also to the user guide for dial pulse/DTMF
phones.
or
j
Dial the external number.
You can only perform one function/establish one
outgoing connection at a time.
The connection is cleared as soon as the function
is successfully activated.
In the case of an external call, the connection is
cleared as soon as one of the call partners hangs
up.