Specifications; Performance - Sanyo MDF-1155 Instruction Manual

SPECIFICATIONS

Name
Model
External dimensions
Internal dimensions
Effective capacity
Exterior
Interior
Door
Insulation
Compressor
Condenser
Evaporator
Refrigerant
Temperature controller
Temperature display
Sensor
Alarm
Battery
Temperature recorder
Back-up system
Accessories
Weight
Option
Note Design or specifications will be subject to change without notice.
The battery for power failure alarm is an article for consumption. It is recommended that the battery will
be replaced about every 3 years. Contact Sanyo sales agency at the time of replacement of the battery
for recycling.

PERFORMANCE

Cooling performance
Control range
Power source
Rated power consumption
Alarm duration
Noise level
Maximum pressure
Note The unit with CE mark complies with EC directives 89/336/EEC, 93/68/EEC and 73/23/EEC.
Ultra-Low Temperature Freezer
MDF-1155
W1400 x D800 x H945 (mm)
W500 x D450x H572 (mm)
Acrylic finish baked on zinc galvanized steel
Acrylic finish baked on zinc galvanized steel
Rigid polyurethane foamed-in place (CFC-FREE)
High stage side; Hermetic type, 1100 W
Low stage side; Semi-hermetic type, 1500W
Fin and tube type (high stage side), Shell and tube type (low stage side)
R-412A (high stage side), Mixed refrigerant (low stage side)
Microprocessor control system
Platinum resistance (Pt 100 )
Nickel-cadmium batteries; buzzer, lamp, remote alarm contact
For power failure alarm; Nickel-cadmium battery, 6VDC, 270mAh
For back-up system; Lead storage battery, 6VDC, 4Ah (only for ATN type)
-----
-----
1 set of key, 2 rubber caps, 1 inner lid, 1 scraper
-----
278 kg
Aluminum container (MDF-49SC)
Center point of freezing room; -152
AC 220 V, 50 Hz AC 220 V, 60 Hz
1800 W
61 dB [A] (background noise; 20 dB)
20
128 L
Aluminum plate
Tube on sheet type
Digital display
Recording chart (for 2 months)
6 recording chart rolls, 1 dry cell
2 recording pens (cartridge)
1 connect tube for back-up system
o
C (Ambient temperature; +30
o o
-100 C to -152 C
AC 230 V, 50 Hz
2030 W 1800 W
9 hours
2844 kPa
MDF-1155ATN
Dry cell driven
Liquid N
2
285 kg
o
C, no load)
AC 240 V, 50 Hz
1800 W