Table of Contents
Advertisement
- HDMI
TM
, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing.
- This set can receive the High-Definition Multimedia Interface (HDMI) or Input of Digital Visual
Interface(DVI).
- This set supports HDCP (High-bandwidth Digital Contents Protection) Protocol for the set (480p,
720p, 1080i) modes.
- When you connect to HDMI/DVI Source devices (DVD Player, STB or PC) that support AUTO
HDMI/DVI Plug & Play, this sets the HDMI/DVI source devices automatically.
After reading HDMI/DVI source devices, using Display Data Channel (DDC) Protocol, Extended
Display Identification Data (EDID) stored in the set is used.
If HDMI/DVI Source devices do not support AUTO HDMI/DVI, the resolution is set manually.
- When Source Devices have DVI Output Connector, you must connect audio with separated cable.
(Refer to <How to connect>)
How to connect
1. When Source Devices (DVD Player or Set Top Box) support HDMI.
- If Source Devices have HDMI Output Connector, Source Devices connect to the set with HDMI
Cable .(not supplied with the product).
- If Source Devices support Auto HDMI, automatically, Source Devices divert output resolution in
1280 x 720p. But if not, refer to the reference Manual of Source Devices and select resolution
manually.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x
720p.
- Because HDMI sends Digital Video and Audio with one cable, there is no need for a special Audio
Cable when using a HDMI Cable.
2. When Source Devices (DVD Player or Set Top Box) supports DVI.
- If Source Devices have DVI Output Connector, Source Devices connect to the set with HDMI to
DVI Cable (not supplied with the product).
- If Source Devices support Auto DVI, automatically, Source Devices divert output resolution in 1280
x 720p. But if not, refer to the reference Manual of Source Devices and select resolution manually.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x
720p.
- In this case, use another cable for audio. When Source Devices have Analog Audio Output
Connector, RGB/DVI Audio Input of the set connect to Audio Cable (not supplied with the product).
And then you can listen to normal Audio.
3. When PC supports DVI.
- If PC have DVI Output Connector, Source Devices connect to the set with HDMI to DVI Cable (not
supplied with the
product).
- To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
- Use the the set's HDMI/DVI (VIDEO) for video connections, depending on your PC connector.
- If the graphics card on the PC does not output analog RGB and DVI simultaneously, connect only
one of either RGB Input or HDMI/DVI Input to display the PC on the set.
- If he graphics card on the PC does output analog RGB and DVI simultaneously, the set to either
RGB Input or HDMI/DVI Input; (the other mode is set to Plug and Play automatically by the set.)
- Then, make the corresponding audio connections. If using a sound card, adjust the PC sound as
required.
- In this case, use another cable for audio. When PC (or sound card of PC) have Analog Audio
Output Connector, RGB/DVI Audio Input of the set connect to Analog Audio Cable (not supplied
with the product). And then you can listen to normal Audio.
39
Advertisement
Table of Contents
