HP 7470A Interfacing And Programming Manual page 210

Set Output Mode Page10-33
. M [(<DEC>) ; (<ASC>) ; (<ASC>) ; (<ASC>( ; (<ASC>));
(<ASC>) ] :
Purpose: Sets parameters for output.
Parameters: <DEC> —Turnaround delay, 0-54 612.
<ASC> —Output trigger character, ASCII 0-127.
<ASC> —Echo terminator character, ASCII 0-127.
<ASC> . . . <ASC> — 1 or 2 output terminators, ASCII
0-127, 0 terminates string.
<ASC> — Output initiator character, ASCII 0-127.
Set Extended Output and Handshake Mode Page10-34
. N [(<DEC>) ; (<ASC>(; ... <ASC>))l:
Purpose: Establishes extended parameters for any output command.
Parameters: <DEC> — Delay between output characters, 0-54 612.
<ASC> . . . <ASC> — Immediate response string of 1 to
10 characters. ASCII 0-127, 0 terminates string; or Xoff
trigger characters.
Output Extended Status Page10-38
.0
Purpose: Outputs the decimal equivalent value of a 16-bitimmediate
status word.
Response: <DEC> [TERM] — a value 40 or less.
Reset Handshake Page10-40
.R
Purpose: Resets the handshake to its default value. It is the same
as sending the commands ESC . @ , ESC . H , ESC . I ,
ESC . M , and ESC . N without parameters.
B-14 INSTRUCTION SYNTAX