Ringer Mute; Change Ringer Type - Toshiba Control panel module for monitor 20550 User Manual

Press the + (up) button to show the next screen(s).
 When the ringer volume is Off (Vibrate), the handset vibrates instead of ringing.
If the handset is on the charger and a call comes in, the ringer outputs the low
tone instead of vibrating.

Ringer Mute

 If the - (down) button is pressed and held for two seconds in standby mode or in
incoming call mode, the handset sets the Ringer mute on, turns on the Ringer
mute icon and stops the ringer. Press and hold the - button for two seconds to turn
the Ringer mute off (unmute).
 Any incoming call will blink on the handset.
 The setting will be saved until it is changed.

Change Ringer Type

1. Press the menu/MUTE button in idle mode. The LCD shows the menu
list.
2. Select Change Ringer Type by the + or - button and press menu/MUTE.
3. The LCD shows tone types and sounds each one as the + or – button is
pressed.
4. Press the menu/MUTE button to save the desired tone.
5