Advertisement
i
2. Operating the Joystick
• Move the grip in any of the 8 directions shown; releasing
the grip returns it to its center position .
• Press either grip switch or body switch; they have the
same function.
When programming in BASIC, use the STICK and STRIG functions. These
functions are described in chapter 5 in the MZ-800 OWNER'S MANUAL.
Note: The joystick connected to the connector on the left (while facing the
rear panel) is called Joystick 1 and the one connected to the connector
on the right is called Joystick 2.
3
Advertisement
