Using The Device; Setting The Time - Silvercrest SR-1400 User Manual

Scan Radio SR-1400
You can use the clip (13) on the scan radio back
panel to fix the device to a belt.
Articles 44.5 and 44.6 of the laws governing
public health protection, with amendment
through Article 2 of the law of 28th May,
1996 allow for a sound pressure limit of 100
dB max. The supplied earphones IEHS-1400
fully comply with these legal requirements.
Audio listening with your player at a high
volume over a long period of time can harm
the user's auditory system.

Using the Device

When powered off, the current time will be shown on
the display (5). When powered on, the display will
show the tuned frequency in MHz.

Setting the Time

The time can only be set while the device is
powered off. If it is still powered on, power the
device off by using the volume control knob (6).
Press and hold the SET button (11).
Then press the HOUR button (10) repeatedly to
set the hour. You can also keep the HOUR
button (10) pressed down to accelerate the digit
adjustment. To distinguish ante meridian
(morning) and post meridian (afternoon) time,
"PM" will display for post meridian clock hours.
30 - English