Siemens OpenStage 15T User Manual

HANDSET USER
GUIDE SIEMENS
OPENSTAGE
15T HANDSETS
HANDSET
NAVIGATION
KEYS
DIALLING OUT
To access an outside line simply dial 9
There are two different ways in which you can dial out:
1: Lift the receiver and dial the number required
2: Dial out without lifting the receiver and the call
dials out through the loud speaker of the phone.
For internal calls simply dial the required
extension number.
HOLD
When on a call, your display will say Enquiry? Press the
OK key. Now the caller will be put on hold. The display
will say Return to held call? To return to the held caller
simply press the OK key again.
Your Siemens OpenStage 15T handsets are menu
driven much like a mobile phone. The menu uses
the display to give you options; the OK key is then
used to confirm these options. If at any time the
option in the display is not the preferred option,
use the arrow keys to change it.
DISPLAY

TRANSFERRING A CALL

When a caller is on the line, your display will say
Enquiry? Press the OK key and the caller will be placed
on hold. Dial the internal number and wait for them
to answer. To transfer the call simply hang up. If the
recipient does not answer press the OK key to go back
to the caller.
EXTERNAL TRANSFER
When the caller is on the line, the display will say
Enquiry? Press the OK key and the caller will be placed
on hold. Dial 9 then dial the external number and wait
for them to answer. To transfer the call simply hang up.
If the recipient does not answer press the OK key to go
back to the caller.
AUDIO KEYS
MAILBOX KEY
SERVICE
PROGRAMMABLE
KEY
KEYPAD
KEYS