Download Print this page

Sanyo SK-ST4 Instruction Manual page 4

4 slice cool touch toaster

Advertisement

• High lift function. This toaster has a high lift function.
If the toast is required to be raised higher than standard
position, manually raise the handle. The toasted bread can
now be removed and the toaster is ready to recommence
toasting.
• Please note: Dry or thin slices will toast more quickly than moist
or thick slices requiring a lower browning control setting. When
toasting more than one slice at the same time, use a similar size
and consistency of bread to achieve equal browning. There
should be a 3-minute break after 2 uses to allow the toaster to
cool down.
MAINTENANCE AND CLEANING
• It is important that crumbs are not allowed to build up inside the
base of the toaster. To remove crumbs from inside of your
toaster, FIRST UNPLUG THE TOASTER, and ensure the
toaster is fully cooled before proceeding. Pull crumb tray located
on the bottom of the toaster out, discard the crumbs, and slide
the crumb tray back into the toaster, locking into position. Never
touch the internal parts of the toaster with a brush or any other
implement. Do not operate the toaster without the crumb tray in
place.
• To clean the outer surface of the toaster, use a soft damp cloth
and dry it afterwards with a dry towel. Clean and store only after
unplugging the toaster from the mains supply.
SANYO Electric Co., Ltd

Advertisement

loading