Configuring The Tv Settings To Enhance 3D Image Viewing - Sharp AQUOS LC-70LE857U Operation Manual

Liquid crystal television
Hide thumbs Also See for AQUOS LC-70LE857U:
Table of Contents

Advertisement

Enjoying 3D Image Viewing (for the LE857U, LE757U, LE755U and LE657U models)
You can convert normal20 images into 30 images.
1
Press
30.
2
Press
<1111/~
to select "20--->30", and then press
ENTER.
3
Turn on the 30 Glasses and place them on your
head.
• The TV returns to 2D mode after 1 hour has passed.
You can switch back to the previous mode by pressing
30.
1
Press
30.
• A confirmation screen is displayed.
2
Select "Yes" and then press
ENTER.
• The TV returns to the previous mode.
Pressing
30
in 30 mode displays the 3D menu.
Press the colored buttons to make the necessary
settings.
A:
3D Brightness Boost
(for the LE857U, LE757U and LE755U models)
B:
3D Surround (See page 23.)
The surround mode changes each time you press
B.
C:
2D-->3D Convert Effect
0: 3D Setup
®-
32
Configuring the TV Settings to
Enhance 3D Image Viewing
You can adjust the 3D image to the desired image
quality and make various settings for 30 image
viewing.
• Set AV
MODE
and "30 Brightness Boost" with
"Picture Settings".
• Set the 30 viewing settings with "System Options"
>
"30 Setup".
• Which items can be selected/adjusted differs
depending on whether the TV is in 2D mode or in 3D
mode.
The audio and video settings can be changed to suit
the program or input content being watched.
STANDARD(30): For a highly defined image in a
normal lighting.
MOVIE(30): For a movie.
GAME(30): Lowers image brightness for easier
viewing.
• You can select AV MODE by pressing AV MODE on
the remote control unit.
You can adjust the backlight of the
TV
for 30 image
viewing.
High/Middle/Low: Select a desired level of 3D
Brightness Boost.
• When "High" or "Low" is selected, "OPC", "Backlight"
and "Range of OPC" are not available.
You can make various settings to enhance 3D image
viewing.
3D
Aut~
Change
This setting can be used to switch to 30 mode
automatically when a 30 identification signal is
detected.
Set the desired mode according to the type of media
you are viewing, such as video from a connected
device or video from an internet application.
Mode 1: 3D mode is selected automatically when a
3D signal is detected while viewing video from a
VOD service or HDMI-connected equipment.
Mode
2:
3D mode is selected automatically when,
in addition to detecting a 3D signal while viewing
video from a VOD service or HDMI-connected
equipment, a video pattern with "Side by Side" or
"Top and Bottom" format is also detected.
Off: Auto change is not performed.
• This function does not work when the input source is
Composite, Component, RGB or Analog/Digital tuner.
ao••Oepth•CPI'I'I:toJ
Select the method for adjusting the 3D depth.
Auto: The depth is adjusted automatically.
Manual: You can manually adjust the depth using
the function "Depth Change".
• This function is only available when the input signal is
3D.
• This function may not be displayed depending on the
type of 3D signal.
Depth Change
Adjusts the depth manually. "0" is the level where no
adjustment is made.
• This function is only available when "3D Depth Control"
is "Manual".
2D--t3D Convert Effect
You can adjust the 30 effect when converting
images from 20 mode to 30 mode.
Select a desired level of convert effect from
+
1 to
+16.
• This function is only available when converting 2D
images to 3D images.
• When you use this function, image conversion on the
TV will result in some differences in the original images
and how they appear.
• 2D images that have been converted to 3D images
may be viewed only for personal use.
Viewlo9Time••tofo
This displays the elapsed time of 30 image viewing.
Yes: Displays the elapsed viewing time on the screen
every hour.
No: Does not display the elapsed viewing t1me.
3D Test
This displays 30 images for testing the 30 operation.
Clicking "Start" on the screen plays back 3D test
images.
• If you press RETURN during playback, the previous
screen will be displayed.
3D Glasses Control
To enable this function, set
"TV
Location" to "Store".
Selecting "Yes" prevents the 30 Glasses from
receiving 3D signals from other TVs.

Advertisement

Table of Contents
loading

Table of Contents