Fixing Problems; Telephone Maintenance; Troubleshooting - Siemens HiPath 3000 Operating Instructions Manual

Hide thumbs Also See for HiPath 3000:

Table of Contents

Fixing Problems

•

Pressed key does not respond:

Check whether the key is stuck.

Telephone does not ring:

Check whether the "do not disturb" function was activated on your tele-

phone. On lifting the handset, you will hear a special dial tone. If so, deac-

tivate it

You cannot dial an external number:

Check whether you telephone is locked. On lifting the handset, you will

hear a special dial tone. If so, unlock the telephone

To correct any other problem:

First contact the service personnel. If the service personnel is unable to

correct the problem, contact Customer Service.

Always use a damp or antistatic cloth to clean the telephone. Never

use a dry cloth.

If the telephone is very dirty, clean it with a diluted neutral cleaner con-

taining surfactants, such as a dish detergent. Afterwards remove all

traces of the cleaner with a damp cloth (using water only).

Never use cleaners containing alcohol, cleaners that corrode plastic, or

abrasive powders.

Page 33.

Page 35.

Table of Contents

Show Quick Links

Table of Contents