Connecting The Power Cord; Binding Cables - Sharp PN-Y555 Operation Manual

Caution
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
[PN-Y555]
[PN-Y475]
[PN-Y425]
14
E

Connecting the Power Cord

Binding Cables

For power outlet
3
2
Power cord AC input terminal
(Supplied)
The cables connected to the terminals on the rear of the
monitor can be fastened with the cable clamp.
Attach the cable clamp into the cable clamp attachment on the
rear of the monitor and fasten the cables.
Cable clamp
Cable clamp
attachment
Main power switch
1
Cable