Related Manuals for Makita HR2475
Summary of Contents for Makita HR2475
- Page 1 INSTRUCTION MANUAL Combination Hammer HR2475 010154 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model HR2475 Concrete 24 mm Core bit 54 mm Capacities Diamond core bit (dry type) 65 mm Steel 13 mm Wood 32 mm No load speed (min 0 - 1,100 Blows per minute 0 - 4,500... - Page 3 Do not expose power tools to rain or wet Power tool use and care conditions. Water entering a power tool will 18. Do not force the power tool. Use the correct increase the risk of electric shock. power tool for your application. The correct Do not abuse the cord.
-
Page 4: Functional Description
hidden wiring or its own cord. Cutting FUNCTIONAL DESCRIPTION accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. CAUTION: Wear a hard hat (safety helmet), safety glasses Always be sure that the tool is switched off and •... -
Page 5: Torque Limiter
position (B side) for counterclockwise rotation. For drilling in wood, metal or plastic materials, depress the lock button and rotate the action mode changing Selecting action mode knob to the symbol. Use a twist drill bit or wood bit. CAUTION: Torque limiter Always set the knob fully to your desired mode •... -
Page 6: Depth Gauge
Clean the bit shank and apply bit grease before installing the bit. Insert the bit into the tool. Turn the bit and push it in until it engages. After installing, always make sure that the bit is securely held in place by trying to pull it out. 1. -
Page 7: Operation
Chipping/Scaling/Demolition OPERATION Hammer drilling operation 010168 Set the action mode changing knob to the symbol. Hold the tool firmly with both hands. Turn the tool on and 010167 Set the action mode changing knob to the symbol. apply slight pressure on the tool so that the tool will not Position the bit at the desired location for the hole, then bounce around, uncontrolled. -
Page 8: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. SDS Plus Carbide-tipped bits • Core bit • Diamond core bit (Dry type) •... - Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884902B222...