Kenmore 116.34924 Owner's Manual page 10

TO STORE ATTACHMENTS
Remove dusting brush or combination
brush, Snap into appropriate storage location.
Remove crevice tool from the wand by twist-
ing. Lay aside.
Remove the extension wand from the hose.
Twist the wand to the left and pull from the
hose end.
Unlock the wand by turning the wand lock-
ing ring to the UNLOCK position.
/ Lower
F.T ,f wan"
// I IUnl°ck I
Upper
Wand
Slide the lower wand into the upper wand.
Turn the wand locking ring to the LOCK
position.
Place the crevice tool down into the com-
pressed wand. Snap into the appropriate
storage location.
Reinsert the hose fully into the opening on
the nozzle body from which it was removed.
Press firmly to assure connection.
CAUTION
EXTENSION HOSE
Some models include an extra hose which
connects to the stretch hose on the vacuum
cleaner for a longer cleaning reach.
Extension
Release
Button
=" \ Connection
_- Stretch Hose
Connect extensionhose to stretchhose by
pressingtogether,Make sure electrical
connectionsare pressed firmly together.
To disconnect press release button on
hose and pull apart.
When using the stretch hose or with
the extension hose attached, the
vacuum cleaner should be on a solid
surface on the same level or below
the level of the user's feel DO NOT
use the hoses when the vacuum
cleaner is above the level of the
user's feel
POWER-MATE JR.®
When attaching Power-Mate Jr.® to
extension hose align electrical connec-
tions and press together. Power-Mate
Jr.® cannot be used with extension wand.
Power-Mate Jr.®
_ Electrical
Connectors
To disconnect press release button on
hose and pull apart.
CAUTION
DO NOT connect Power-Mate Jr._ to
electrified hose with power to
vacuum cleaner ON. ALWAYS unplug
before connecting powered
attachments.
CAUTION
DO NOT leave the Power-Mate Jr.®
running in one spot for any length of
time. Damage to carpet may occur.
10