HP ProCurve MSM410 Quick Start Manual

The MSM410 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED 802.11a/b/g and
802.11n draft 2.0 product. Draft 2.0 refers to the version of the not-yet-ratified
IEEE 802.11n standard used in Wi-Fi Alliance testing as of June 2007. The Wi-
Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
This Quickstart shows you how to get started using the MSM410 Access Point (US J9426A, WW J9427A).
After reading this Quickstart, you can visit www.procurve.com/manuals and download documents of particular interest such as the MSM3xx / MSM4xx Access
Points Management and Configuration Guide and the MSM7xx Controllers Management and Configuration Guide.

Hardware overview

Package contents
MSM410 with detachable mounting bracket and two mounting screws with wall anchors.
Ports
• Ethernet port: Auto-sensing 10/100/1000 BaseT Ethernet port with RJ-45 connector.
The port supports Power over Ethernet (PoE) 802.3af.
• Console port: Standard console (serial) port with an RJ-45 connector. For details, see
the MSM410 console port description in the MSM3xx / MSM4xx Access Points
Management and Configuration Guide
MSM410 Access Point Quickstart
Status lights
(left to right)
Power, Ethernet,
Radio
Lock tab
Ethernet port (Port 1)
Never connect the Console port to an Ethernet switch or PoE power source.
Warning:
This may damage the MSM410. Connect it only to other serial ports via an
RJ-45 to DB-9 adapter or equivalent.
Radios and antennas
The MSM410 contains an integrated single 802.11n Draft 2 compliant radio with an internal
three-element, dual-band, MIMO antenna.
Cable channel
Mounting bracket
tab slots
Console port