Epson XP-520 Instructions

XP-520/XP-620/XP-820 Small-in-One
Start Here
1
Unpack
2
Turn on and configure
1
2
Caution: Do not connect to your computer yet.
3

Install ink cartridges

Shake the BK (black)
cartridge only.
Insert the cartridges at a slight
angle as shown.
4

Load paper

Read these instructions before using your product. The illustrations show the XP-820, but the steps are the
same for the XP-520 and XP-620.
Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de configuración
en español, consulte la Guía de instalación en epson.com/support/xp520sp, epson.com/support/xp620sp
o epson.com/support/xp820sp (requiere una conexión a Internet).
1
2
Note: Store the caps in the included
plastic bag. Use them to recap the
ink cartridges after removing them for
storage or disposal.
Printer
®
1
Select your language, country, date, and time if applicable.
Note: You can change these settings later using the product's control panel.
For more information, see the online User's Guide.
Note: The cartridges included with the printer are designed for printer setup
and not for resale. After some ink is used for priming, the rest is available for
printing.
Caution: Don't turn off the printer or raise the scanner unit while the printer is
priming or you'll waste ink.
Select the paper settings on the product's control panel.
English
Note: Do not open ink
cartridge packages until
2 you are ready to install
the ink. Cartridges are
vacuum packed to
maintain reliability.