Blacklist; Block Hosts - D-Link NetDefend DFL-210 Cli Reference Manual

2.2.7. blacklist

Options
<interface>
2.2.7. blacklist
Blacklist.
Description
Block and unblock hosts on the black and white list.
Note: Static blacklist hosts cannot be unblocked.
If -force is not specified, only the exact host with the service, protocol/port and destiny specified
is unblocked.
Example 2.8. Block hosts
blacklist -show -black -listtime -info
blacklist -block 100.100.100.0/24 -serv=FTP -dest=50.50.50.1 -time=6000
Usage
blacklist -show [-creationtime] [-dynamic] [-listtime] [-info]
Show information about the blacklisted hosts.
blacklist -block <host> [-serv=<service>] [-prot={TCP | UDP | ICMP
Block specified netobject.
blacklist -unblock <host> [-serv=<service>] [-prot={TCP | UDP |
Unblock specified netobject.
Options
-all
-black
-block
-creationtime
Interface to show BigPond information.
[-black] [-white] [-all]
| OTHER | TCPUDP | ALL}] [-port=<port number>] [-dest=<ip
address>] [-time=<seconds>]
ICMP | OTHER | TCPUDP | ALL}] [-port=<port number>]
[-dest=<ip address>] [-time=<seconds>] [-force]
Show all the information.
Show blacklist hosts only.
Block specified netobject. (Admin only)
Show creation time.
33
Chapter 2. Command Reference