Appendix C
Connector and Pinout Specifications
C.5 Ethernet Port
The Ethernet port, a 10BaseT interface with an RJ-48 receptacle connector, is on the NI-2 card faceplate.
It is used to connect the Cisco 6260 to the management station, a Sun SPARCstation running Cisco DSL
Manager (CDM) software.
Ethernet connector.
Table C-3
Pin
Number
1
2
3
4
5
6
7
8
Figure C-6
Pin 1
Pin 8
OL-2365-02
Table C-3
shows the pin assignments, and
Pin Assignments for the NI-2 Card Management Ethernet Connector
Signal
TX+
TX–
RX+
Unused
Unused
RX–
Unused
Unused
NI-2 Card Management Ethernet Connector
RJ-45 female
Figure C-6
shows an NI-2 card
Cisco 6260 Hardware Installation Guide
Ethernet Port
C-5