Related Manuals for Kenwood KDC-3034A/G
Summary of Contents for Kenwood KDC-3034A/G
- Page 1 CD-RECEIVER KDC-W4534 KDC-W4034A/G/AY/GY KDC-W434A/G/GY KDC-W410A/G/AY/GY KDC-W40G KDC-3034A/G INSTRUCTION MANUAL © B64-3294-00/00 (EW/EN/E2W/E2N)
-
Page 2: Table Of Contents
Contents Safety precautions Notes About MP3 and WMA About CDs General features Power Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting Switching Display Dimmer Control Theft Deterrent Faceplate TEL Mute Tuner features Tuning Tuning Mode Station Preset Memory Auto Memory Entry Preset Tuning... -
Page 3: Safety Precautions
Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. -
Page 4: Notes
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • If the unit fails to operate properly, press the Reset button. - Page 5 This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that have adopted separate waste collection systems) Products with the symbol (crossed-out wheeled bin) cannot be disposed as...
-
Page 6: About Mp3 And Wma
About MP3 and WMA The playable MP3/WMA file (hereafter called Audio file) and the media format has the following limitation. The Audio file, which is not comforming to the specification, may not play normally, or the file and folder names may not display correctly. Playable Audio file •... -
Page 7: About Cds
About CDs Handling CDs • Do not touch the recording surface of the CD. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. •... -
Page 8: General Features
General features Release button ATT/DIM LOUD indicator ATT indicator Power Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source Press the [SRC] button. Source required Tuner External disc* (Optional accessory) Auxiliary input*... -
Page 9: System Q
System Q Selecting the best sound setting preset for different types of music. Select the source to set Press the [SRC] button. Select the Sound type Press the [Q] button. When you press the button once, the current sound setting is displayed. Each time you press the button, the sound setting alternates. -
Page 10: Speaker Setting
General features Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. Enter Standby Press the [SRC] button. Select the "STANDBY" display. Enter Speaker Setting mode Press the [VOL] knob. Select the Speaker type Turn the [VOL] knob. -
Page 11: Dimmer Control
Dimmer Control You can lower the brightness of the display by using the dimmer function. Press the [DIM] button for at least 1 second. Each time you press the button for 1 second, the Dimmer contol turns ON or OFF. When the Dimmer control is ON, "DIM ON"... -
Page 12: Tuner Features
Tuner features AUTO/ Band display Tuning Selecting the station. Select tuner source Press the [SRC] button. Select the "TUNER" display. Select the band Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM1, FM2, and FM3 bands. -
Page 13: Station Preset Memory
Station Preset Memory Putting a station in the memory. Select the band Push the Control knob towards [FM] or [AM]. Select the frequency to put in the memory Push the Control knob towards [4] or [¢]. Put the frequency in the memory Press the desired [1] —... -
Page 14: Rds Features
Function of the KDC-W4534/KDC-W4034A/AY/G/GY/KDC-3034A/G/KDC-W410A/AY/G/GY RDS features TI indicator Traffic Information Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio. Press the [TI] button. Each time you press the button, the Traffic information function turns ON and OFF. -
Page 15: Pty (Program Type)
PTY (Program Type) Selecting the Program Type and searching for a station. Enter PTY mode Press the Control knob. During PTY mode the "PTY" indicator is ON. • This function cannot be used during a traffic bulletin or AM reception. Select the Program Type Push the Control knob towards [FM] or [AM]. -
Page 16: Changing Language For Pty Function
Function of the KDC-W4534/KDC-W4034A/AY/G/GY/KDC-3034A/G/KDC-W410A/AY/G/GY RDS features Changing Language for PTY Function Selecting the Program Type display language. Enter PTY mode Refer to <PTY (Program Type)> (page 15). Enter Changing Language mode Press the [TI] button. Select the language Push the Control knob towards [FM] or [AM]. -
Page 17: Cd/Audio File/External Disc Control Features
CD/Audio file/External disc control features Playing CD & Audio file When a disc is inserted Press the [SRC] button. Select the "CD" display. • When a CD is inserted, the "IN" indicator is ON. Pause and play Press the Control knob. Each time you press the knob, the audio pauses or plays. -
Page 18: Fast Forwarding And Reversing
CD/Audio file/External disc control features Fast Forwarding and Reversing Fast Forwarding Hold down toward [¢] with the Control knob. Release your finger to play the disc at that point. Reversing Hold down toward [4] with the Control knob. Release your finger to play the disc at that point. •... -
Page 19: Magazine Random Play
Function of the KDC-W4534 Function of disc changer Magazine Random Play Play the songs on all the discs in the disc changer in random order. Press the [M.RDM] button. Each time you press the button, the Magazine Random Play turns ON or OFF. When the Magazine Random mode is ON, "MGZN RDM"... -
Page 20: Menu System
Menu system RDS indicator Menu System Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. Enter Menu mode Press the [MENU] button for at least 1 second. -
Page 21: Security Code
Function of the KDC-W4534 In Standby mode Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. -
Page 22: Manual Clock Adjustment
Adjust the minutes Push the Control knob towards [4] or [¢]. Exit Clock adjustment mode Press the [MENU] button. Function of the KDC-W4534/KDC-W4034A/AY/G/ GY/KDC-3034A/G/KDC-W410A/AY/G/GY In Standby mode Synchronize Clock Synchronizing the RDS station time data and this unit’s clock. Display Setting "SYNC ON"... -
Page 23: News Bulletin With Timeout Setting
Function of the KDC-W4534/KDC-W4034A/AY/G/ GY/KDC-3034A/G/KDC-W410A/AY/G/GY News Bulletin with Timeout Setting The tuner automatically changes when a news bulletin starts even if the radio is not being listened to. Also, you can set the time interval when interruption is prohibited. Display and Setting "NEWS OFF"... -
Page 24: Auto Tp Seek
Menu system Function of the KDC-W4534/KDC-W4034A/AY/G/ GY/KDC-3034A/G/KDC-W410A/AY/G/GY Auto TP Seek When the TI function is ON and the reception is poor while listening to a traffic information station, another traffic information station with better reception will be searched for automatically. -
Page 25: Power Off Timer
In Standby mode Power OFF Timer Setting the timer to turn this unit’s power OFF automatically when Standby mode continues. Using this setting can save the vehicle’s battery power. Display Setting "OFF – – –" Power OFF Timer function is OFF. "OFF 20M"... -
Page 26: Accessories/ Installation Procedure
...1 wire should be checked. • If your car is not prepared for this special connection- system, consult your Kenwood dealer. • Only use antenna conversion adaptors (ISO-JASO) when the antenna cord has an ISO plug. • Make sure that all wire connections are securely made by ...2... -
Page 27: Connecting Wires To Terminals
KDC-W4534 KDC-W4034A/W4034AY/ W4034G/W4034GY/ W410A/W410AY/W410G/ W410GY/3034A/3034G A To Steering remote To Steering remote B To Kenwood disc changer/ External optional accessory C Rear left output (White)/ Rear left output (White)/ Rear right output (Red) Rear right output (Red) FM/AM antenna input... - Page 28 Connecting Wires to Terminals Connector Function Guide Pin Numbers for Cable Colour ISO Connectors External Power Connector Yellow Blue/White Black Speaker Connector Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black English 2WARNING Functions Connecting the ISO Connector The pin arrangement for the ISO connectors depends on the type of vehicle you drive.
-
Page 29: Installation
Installation Installation Metal mounting strap (commercially available) Firewall or metal support Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Screw (M4X8) (commercially available) • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). -
Page 30: Removing The Unit
Removing the Unit Removing the hard rubber frame Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Accessory2 Removal tool When the upper level is removed, remove the lower two locations. -
Page 31: Troubleshooting Guide
Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General The power does not turn ON. ✔... - Page 32 Troubleshooting Guide Disc source "AUX EXT" is displayed without achieving External disc control mode. ✔ Unsupported disc changer is connected. ☞ Use the disc changer mentioned in the <About CD players/disc changers connected to this unit> (page 3) of the section on <Safety precautions>.
- Page 33 The messages shown below display your systems condition. EJECT: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. ➪ Load the disc magazine properly. No CD in the unit. ➪ Insert the CD. NO DISC: No disc has been loaded in the disc magazine.
-
Page 34: Specifications
Specifications Specifications subject to change without notice. FM tuner section Frequency range (50 kHz space) : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 0.7 μV /75 Ω Quieting Sensitivity (S/N = 46dB) : 1.6 μV /75 Ω Frequency response (±3.0 dB) : 30 Hz –... - Page 35 Audio section Maximum output power KDC-W4534/W4034AY/W4034GY/W434GY/ W410AY/W410GY : 50 W x 4 KDC-W4034A/W4034G/3034A/3034G/ W434A/ W434G/W410A/W410G/W40G : 45 W x 4 Output power (DIN 45324, +B=14.4V) KDC-W4534/W4034AY/W4034GY/W434GY/ W410AY/W410GY : 30 W x 4 KDC-W4034A/W4034G/3034A/3034G/ W434A/ W434G/W410A/W410G/W40G : 28 W x 4 Speaker Impedance : 4 - 8 Ω...