Configuring Jpeg Encoder Settings - Siemens CCIS1337-LP Configuration Manual

Configuration

10.4.3 Configuring JPEG encoder settings

34
Siemens Building Technologies
Fire Safety & Security Products
Name
Overlay text
Overlay text position
Overlay text color
Click Save.
4.
The live video image can be displayed at the following resolutions:
Low
Standard
High
You can assign a quality level to each resolution.
The table below shows guideline values in kilobytes for the size of data stream
required for image transmission. The size of the data stream depends on the
resolution setting and the chosen quality level.
Image size Low quality
176 x 144 4 KB
352 x 288 9 KB
704 x 576 26 KB
The values shown relate to a color image of average complexity.
Open the unit's home page. See Section 7.4 Accessing the unit's home page.
1.
Select Image parameters in the Configuration menu.
2.
The Image parameters dialog appears:
Enter a name for the video source here. This name will only be shown
in the browser image.
(See Section 10.5.3 Setting the synchronization.)
You can select the parameters that are to be overlaid on the live video
image here.
– (no text overlay)
Time
Time + date
Video source
Video source + time
Video source + time + date
You can select the position of the text overlay on the live video image
here.
Top left
Top right
Bottom left
Bottom right
Choose the color for the text overlay here.
White
Yellow
Pink
Red
Turquoise
Green
Blue
Black
Medium quality
5 KB
11 KB
37 KB
High quality
12 KB
34 KB
137 KB
04.2006