Advertisement
Connections
Note:
Up to two COAX-SSP converters can be connected when making an SSP (RS-485) connection. If more than
two units are connected together, delays may occur in SSP (RS-485) signal response and communication
may not proceed correctly.
After connecting, change the communication speed settings, alarm settings and address settings for the
camera or multiplexer to match the settings for other peripheral equipment. If the settings are not correct,
the system may not operate correctly.
Operating a SSP (RS-485) signal-type camera using a coaxial-type
multiplexer
This unit can convert coaxial signals into SSP (RS-485) signals, so that an SSP (RS-485) signal-type camera can
be operated using a coaxial-type multiplexer.
CONTROL SIGNAL
MIX
SEPA
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
TV monitor
(sold separately)
This installation should be made by qualified service person and should
conform to all local codes.
WARNING: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
English
VIDEO IN
connector
SSP (RS-485)
CONTROL SIGNAL
TERMINATE
MIX
SEPA
OFF
ON
CAMERA
VIDEO
IN
OUT
RS485
ALARM
A
B
C
AL
Coaxial-type multiplexer (sold separately)
Camera unit
(sold separately)
ALARM IN
connector
19200
POWER
9600
bps
2400
4800
24V AC
CLASS 2 WIRING
GND
12V DC
VIDEO IN
connector
– 3 –
GND
SSP
(RS-485)
System controller
(sold separately)
or
Advertisement
